Lihat spesifikasi untuk detail produk.
BT169D-L,116
Product Overview
Category
The BT169D-L,116 belongs to the category of semiconductor devices.
Use
It is commonly used as a switching device in electronic circuits.
Characteristics
- Low power consumption
- High switching speed
- Small package size
Package
The BT169D-L,116 is typically available in a TO-92 package.
Essence
This product serves as a crucial component in electronic circuitry for controlling the flow of current.
Packaging/Quantity
The BT169D-L,116 is usually packaged in reels and is available in quantities suitable for industrial applications.
Specifications
- Maximum Voltage: 400V
- Maximum Current: 0.8A
- Gate Trigger Current: 5mA
- Holding Current: 5mA
- Turn-off Time: 2µs
Detailed Pin Configuration
The BT169D-L,116 has three pins: 1. Gate (G) 2. Anode (A) 3. Cathode (K)
Functional Features
- Reliable switching performance
- Low power dissipation
- Suitable for low voltage applications
Advantages
- Compact size
- Fast switching speed
- Low power consumption
Disadvantages
- Limited maximum voltage and current ratings
- Sensitive to overvoltage conditions
Working Principles
The BT169D-L,116 operates based on the principle of controlling the flow of current between the anode and cathode through the application of a gate trigger current.
Detailed Application Field Plans
The BT169D-L,116 finds extensive use in various applications such as: - Lighting control circuits - Motor control circuits - Switching power supplies - Home automation systems
Detailed and Complete Alternative Models
Some alternative models to the BT169D-L,116 include: - BT169D - BT169G - BT169D-800E
In conclusion, the BT169D-L,116 is a versatile semiconductor device with fast switching speed and low power consumption, making it suitable for a wide range of electronic applications.
Word Count: 275
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan BT169D-L,116 dalam solusi teknis
What is the BT169D-L,116 used for?
- The BT169D-L,116 is a sensitive gate silicon controlled rectifier (SCR) designed for use in general-purpose switching and phase control applications.
What are the typical applications of BT169D-L,116?
- The BT169D-L,116 is commonly used in light dimmers, motor control, heating control, and other general-purpose switching applications.
What is the maximum voltage and current rating of BT169D-L,116?
- The maximum voltage rating is typically 400V, and the maximum continuous current rating is around 0.8A.
How does the BT169D-L,116 operate?
- The BT169D-L,116 operates as an electronic switch, conducting current when a small current is applied to its gate terminal.
What are the key features of BT169D-L,116?
- Some key features include low gate trigger current, high surge current capability, and sensitive gate triggering.
Can BT169D-L,116 be used for AC or DC applications?
- The BT169D-L,116 is suitable for both AC and DC applications due to its bidirectional blocking capability.
What precautions should be taken when using BT169D-L,116 in a circuit?
- It's important to ensure proper heat sinking, avoid exceeding the maximum ratings, and provide adequate isolation between the control circuit and the power circuit.
Are there any specific application notes or reference designs available for BT169D-L,116?
- Yes, many manufacturers provide application notes and reference designs for using the BT169D-L,116 in various technical solutions.
What are the typical control signals used to trigger the BT169D-L,116?
- The BT169D-L,116 can be triggered by a wide range of control signals, including microcontroller outputs, logic gates, and optocouplers.
Where can I find the detailed datasheet for BT169D-L,116?
- The detailed datasheet for BT169D-L,116 can be found on the manufacturer's website or through authorized distributors.