Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
SUM90P10-19-E3

SUM90P10-19-E3

Product Overview

Category

SUM90P10-19-E3 belongs to the category of power MOSFETs.

Use

It is used for power management and switching applications in various electronic circuits.

Characteristics

  • High voltage capability
  • Low on-resistance
  • Fast switching speed
  • Low gate charge
  • Enhanced thermal performance

Package

The SUM90P10-19-E3 is typically available in a TO-220 package.

Essence

This MOSFET is essential for efficient power control and management in electronic devices.

Packaging/Quantity

It is commonly packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Drain-Source Voltage (VDS): 100V
  • Continuous Drain Current (ID): 90A
  • On-Resistance (RDS(on)): 19mΩ
  • Gate-Source Voltage (VGS): ±20V
  • Total Gate Charge (Qg): 60nC
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The pin configuration of SUM90P10-19-E3 typically includes three pins: gate, drain, and source. The gate pin is often placed in the middle, while the drain and source pins are located on either side.

Functional Features

  • High current-carrying capability
  • Low conduction losses
  • Fast switching characteristics
  • Suitable for high-frequency applications
  • Enhanced thermal performance

Advantages and Disadvantages

Advantages

  • High voltage capability
  • Low on-resistance
  • Efficient thermal performance
  • Fast switching speed
  • Suitable for high-power applications

Disadvantages

  • Higher cost compared to standard MOSFETs
  • Sensitive to electrostatic discharge (ESD)

Working Principles

SUM90P10-19-E3 operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals. When a sufficient gate-source voltage is applied, the MOSFET enters the conducting state, allowing current to flow through it.

Detailed Application Field Plans

Power Supplies

The MOSFET can be utilized in power supply units for efficient voltage regulation and power management.

Motor Control

It can be employed in motor control circuits to regulate the speed and direction of motors in various applications.

Inverters

SUM90P10-19-E3 is suitable for use in inverter circuits for converting DC power to AC power in applications such as solar inverters and uninterruptible power supplies (UPS).

LED Lighting

In LED lighting systems, this MOSFET can be used for dimming and controlling the brightness of LEDs.

Detailed and Complete Alternative Models

  • IRF1405
  • FDP8870
  • STP80NF55-06

In conclusion, SUM90P10-19-E3 is a high-performance power MOSFET with excellent voltage handling capabilities, low on-resistance, and fast switching characteristics. Its application spans across various fields including power supplies, motor control, inverters, and LED lighting systems, making it an essential component in modern electronic designs.

Word Count: 444

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SUM90P10-19-E3 dalam solusi teknis

  1. What is SUM90P10-19-E3?

    • SUM90P10-19-E3 is a power MOSFET transistor designed for high efficiency and low power dissipation in technical solutions.
  2. What are the key specifications of SUM90P10-19-E3?

    • The key specifications include a maximum drain-source voltage of 100V, a continuous drain current of 90A, and a low on-resistance.
  3. How can SUM90P10-19-E3 be used in motor control applications?

    • SUM90P10-19-E3 can be used to drive and control high-power motors due to its high current handling capability and low on-resistance.
  4. In what types of power supply designs can SUM90P10-19-E3 be utilized?

    • SUM90P10-19-E3 is suitable for use in various power supply designs, including switch-mode power supplies and DC-DC converters, where high efficiency and low power dissipation are crucial.
  5. What thermal management considerations should be taken into account when using SUM90P10-19-E3?

    • Proper heat sinking and thermal management techniques should be employed to ensure that the MOSFET operates within its specified temperature range for optimal performance and reliability.
  6. Can SUM90P10-19-E3 be used in automotive applications?

    • Yes, SUM90P10-19-E3 is well-suited for automotive applications such as electric vehicle powertrains, battery management systems, and other high-current switching applications.
  7. What protection features does SUM90P10-19-E3 offer?

    • SUM90P10-19-E3 provides built-in protection against overcurrent, overvoltage, and thermal overload, enhancing the reliability of the overall system.
  8. Are there any application notes or reference designs available for using SUM90P10-19-E3?

    • Yes, the manufacturer provides application notes and reference designs to assist engineers in implementing SUM90P10-19-E3 in various technical solutions.
  9. What are the typical operating conditions for SUM90P10-19-E3?

    • The typical operating conditions include a gate-source voltage of 10V, a continuous drain current of 90A, and a junction temperature within the specified limits.
  10. Where can I find detailed technical documentation for SUM90P10-19-E3?

    • Detailed technical documentation, including datasheets, application guides, and product briefs, can be found on the manufacturer's website or through authorized distributors.