Vishay Siliconix
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
IRFR9014NTR
Lihat Detail Lembar Data

IRFR9014NTR

Product Overview

Category: Power MOSFET
Use: Switching applications in power supplies, converters, and motor control
Characteristics: High voltage, low on-resistance, fast switching speed
Package: TO-252
Essence: N-channel power MOSFET
Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Voltage Rating: 60V
  • Continuous Drain Current: 10A
  • RDS(ON): 0.23 Ohm
  • Gate Threshold Voltage: 1-2V
  • Total Gate Charge: 16nC
  • Power Dissipation: 2.5W

Detailed Pin Configuration

The IRFR9014NTR has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • Low on-resistance for minimal power loss
  • Fast switching speed for efficient operation
  • High voltage rating for versatile applications

Advantages and Disadvantages

Advantages: - High voltage rating allows for use in various applications - Low on-resistance reduces power dissipation - Fast switching speed enhances efficiency

Disadvantages: - Sensitive to static electricity - Requires careful handling during assembly

Working Principles

The IRFR9014NTR operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals. When a sufficient voltage is applied to the gate, the MOSFET switches on, allowing current to flow through.

Detailed Application Field Plans

The IRFR9014NTR is suitable for a wide range of applications, including: - Power supplies - DC-DC converters - Motor control circuits - Electronic load switches - Battery management systems

Detailed and Complete Alternative Models

  1. IRFR9024NTR: Similar specifications with higher voltage rating
  2. IRFR3709ZTRPBF: Lower on-resistance with comparable voltage rating
  3. IRFR024NTR: Lower voltage rating with similar on-resistance

In conclusion, the IRFR9014NTR is a versatile power MOSFET suitable for various switching applications due to its high voltage rating, low on-resistance, and fast switching speed. Careful handling and consideration of alternative models can maximize its effectiveness in different electronic designs.

Word count: 298

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan IRFR9014NTR dalam solusi teknis

  1. What is the IRFR9014NTR?

    • The IRFR9014NTR is a power MOSFET transistor designed for various electronic applications, including switching and amplification.

  2. What are the key specifications of the IRFR9014NTR?

    • The IRFR9014NTR features a Vds (drain-source voltage) of 60V, Id (continuous drain current) of 10A, and Rds(on) (on-state resistance) of 0.19 ohms.

  3. In what types of technical solutions can the IRFR9014NTR be used?

    • The IRFR9014NTR can be used in power management, motor control, DC-DC converters, and other applications requiring high-speed switching and low on-state resistance.

  4. What are the typical operating conditions for the IRFR9014NTR?

    • The IRFR9014NTR operates within a temperature range of -55°C to 150°C and is suitable for both low and high-frequency applications.

  5. How does the IRFR9014NTR compare to similar MOSFET transistors?

    • Compared to similar MOSFETs, the IRFR9014NTR offers a balance of high current capability, low on-state resistance, and fast switching speed.

  6. What are the recommended circuit configurations for using the IRFR9014NTR in a switching application?

    • For switching applications, the IRFR9014NTR is commonly used in conjunction with appropriate gate driving circuitry and protective components to ensure reliable and efficient operation.

  7. Are there any specific considerations for heat dissipation when using the IRFR9014NTR?

    • Proper thermal management is important when using the IRFR9014NTR, especially in high-power applications, to ensure that the device operates within its specified temperature limits.

  8. Can the IRFR9014NTR be used in automotive applications?

    • Yes, the IRFR9014NTR is suitable for use in automotive systems, provided it meets the specific requirements and standards for automotive-grade components.

  9. What are the typical failure modes of the IRFR9014NTR and how can they be mitigated?

    • Common failure modes include overcurrent, overvoltage, and thermal stress. These can be mitigated through proper circuit protection, derating guidelines, and thermal design considerations.

  10. Where can I find detailed application notes and reference designs for using the IRFR9014NTR in technical solutions?

    • Detailed application notes and reference designs for the IRFR9014NTR can be found on the manufacturer's website, as well as in technical literature and engineering resources related to power electronics and semiconductor devices.