Vishay Siliconix
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
IRF9Z24
Lihat Detail Lembar Data

IRF9Z24

Product Overview

Category: Power MOSFET
Use: Switching applications
Characteristics: High voltage, high speed
Package: TO-220AB
Essence: Power transistor
Packaging/Quantity: Bulk packaging, quantity varies

Specifications

  • Voltage - Drain-Source Breakdown (Max): 55V
  • Current - Continuous Drain (Id) @ 25°C: 12A
  • Rds On (Max) @ Id, Vgs: 85 mOhm @ 6A, 10V
  • Vgs(th) (Max) @ Id: 4V @ 250µA
  • Gate Charge (Qg) @ Vgs: 20nC @ 10V
  • Input Capacitance (Ciss) @ Vds: 1100pF @ 25V
  • Power Dissipation (Max): 75W

Detailed Pin Configuration

  1. Gate (G)
  2. Drain (D)
  3. Source (S)

Functional Features

  • Fast switching speed
  • Low gate charge
  • Low on-resistance
  • High input capacitance

Advantages and Disadvantages

Advantages: - Suitable for high-speed switching applications - Low power dissipation - Compact TO-220AB package

Disadvantages: - Higher input capacitance may require additional driver circuitry - Limited voltage and current ratings compared to some alternatives

Working Principles

The IRF9Z24 is a power MOSFET designed for high-speed switching applications. When a suitable voltage is applied to the gate terminal, it allows a high current to flow between the drain and source terminals, effectively acting as a switch.

Detailed Application Field Plans

The IRF9Z24 is commonly used in: - Switching power supplies - Motor control circuits - LED lighting applications - DC-DC converters

Detailed and Complete Alternative Models

  1. IRF9Z34N
  2. IRF9Z30
  3. IRF9Z20

Note: The above list is not exhaustive and there are several alternative models available from different manufacturers.

This information provides a comprehensive overview of the IRF9Z24 power MOSFET, including its specifications, features, application areas, and alternatives.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan IRF9Z24 dalam solusi teknis

  1. What is the IRF9Z24?

    • The IRF9Z24 is a power MOSFET transistor designed for high-speed switching applications in power supplies, motor control, and other electronic systems.

  2. What is the maximum voltage and current rating of the IRF9Z24?

    • The IRF9Z24 has a maximum voltage rating of 55V and a continuous drain current rating of 12A.

  3. What are the typical applications of the IRF9Z24?

    • Typical applications include DC-DC converters, motor control, power management, and other high-speed switching circuits.

  4. What is the on-resistance of the IRF9Z24?

    • The on-resistance of the IRF9Z24 is typically around 0.12 ohms.

  5. Is the IRF9Z24 suitable for high-frequency switching applications?

    • Yes, the IRF9Z24 is designed for high-speed switching and can be used in high-frequency applications.

  6. Does the IRF9Z24 require a heat sink for operation?

    • It depends on the specific application and the amount of power dissipation. In some cases, a heat sink may be necessary to ensure proper thermal management.

  7. What is the gate-source voltage (Vgs) required for the IRF9Z24 to fully turn on?

    • The IRF9Z24 typically requires a gate-source voltage of around 10V to fully enhance its conductivity.

  8. Can the IRF9Z24 be used in automotive applications?

    • Yes, the IRF9Z24 is suitable for automotive applications, provided it meets the necessary specifications and requirements.

  9. What are the key advantages of using the IRF9Z24 in technical solutions?

    • Some key advantages include low on-resistance, high-speed switching capability, and suitability for various power management applications.

  10. Are there any important considerations when designing with the IRF9Z24?

    • Designers should consider factors such as gate drive requirements, thermal management, and protection circuitry to ensure reliable and efficient operation of the IRF9Z24 in their technical solutions.