Vishay Siliconix
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
IRF730STRRPBF
Lihat Detail Lembar Data

IRF730STRRPBF

Product Overview

Category

The IRF730STRRPBF belongs to the category of power MOSFETs.

Use

It is commonly used as a switching device in electronic circuits, particularly in power supply and motor control applications.

Characteristics

  • High voltage capability
  • Low on-resistance
  • Fast switching speed
  • Low gate drive power

Package

The IRF730STRRPBF is typically available in a TO-220AB package.

Essence

This MOSFET is essential for controlling high-power loads efficiently and effectively.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on supplier and customer requirements.

Specifications

  • Drain-Source Voltage (VDS): 400V
  • Continuous Drain Current (ID): 5.5A
  • On-Resistance (RDS(on)): 1.75Ω
  • Power Dissipation (PD): 75W
  • Gate-Source Voltage (VGS): ±20V
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The IRF730STRRPBF has a standard three-pin configuration: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • High voltage capability allows it to handle large loads.
  • Low on-resistance minimizes power loss and heat generation.
  • Fast switching speed enables efficient control of the connected load.
  • Low gate drive power requirement simplifies the driving circuitry.

Advantages

  • Suitable for high voltage applications
  • Low power dissipation
  • Fast switching speed

Disadvantages

  • Relatively higher on-resistance compared to some alternative models
  • Limited continuous drain current compared to higher-rated MOSFETs

Working Principles

The IRF730STRRPBF operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals. When a sufficient voltage is applied to the gate, the MOSFET turns on, allowing current to flow through it.

Detailed Application Field Plans

Power Supplies

In power supply circuits, the IRF730STRRPBF can be used to switch high currents with minimal power loss, making it suitable for both linear and switching power supply designs.

Motor Control

Due to its fast switching speed and low on-resistance, this MOSFET is ideal for controlling the speed and direction of DC motors in various applications, including robotics and industrial automation.

Lighting Systems

The IRF730STRRPBF can be employed in lighting systems to regulate the current flow to high-power LEDs or other lighting elements, enabling efficient and precise control.

Detailed and Complete Alternative Models

  1. IRF740: Similar characteristics with higher continuous drain current rating
  2. IRF720: Lower on-resistance but with lower voltage capability
  3. IRF840: Higher voltage capability and continuous drain current rating

In conclusion, the IRF730STRRPBF is a versatile power MOSFET with excellent voltage handling capabilities, making it suitable for a wide range of applications in power electronics and control systems.

[Word count: 477]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan IRF730STRRPBF dalam solusi teknis

  1. What is the maximum drain-source voltage of IRF730STRRPBF?

    • The maximum drain-source voltage of IRF730STRRPBF is 400 volts.

  2. What is the continuous drain current rating of IRF730STRRPBF?

    • The continuous drain current rating of IRF730STRRPBF is 5.5 amperes.

  3. What is the on-state resistance (RDS(on)) of IRF730STRRPBF?

    • The on-state resistance (RDS(on)) of IRF730STRRPBF is typically 0.75 ohms.

  4. Can IRF730STRRPBF be used for switching applications?

    • Yes, IRF730STRRPBF is suitable for switching applications due to its low on-state resistance and high drain-source voltage rating.

  5. What is the maximum power dissipation of IRF730STRRPBF?

    • The maximum power dissipation of IRF730STRRPBF is 75 watts.

  6. Is IRF730STRRPBF suitable for use in motor control circuits?

    • Yes, IRF730STRRPBF can be used in motor control circuits due to its high drain-source voltage and current ratings.

  7. Does IRF730STRRPBF require a heat sink for high-power applications?

    • Yes, for high-power applications, it is recommended to use a heat sink to ensure proper thermal management.

  8. What are the typical applications of IRF730STRRPBF?

    • Typical applications of IRF730STRRPBF include power supplies, motor control, and high-power switching circuits.

  9. What is the gate threshold voltage of IRF730STRRPBF?

    • The gate threshold voltage of IRF730STRRPBF is typically 2.0 volts.

  10. Is IRF730STRRPBF RoHS compliant?

    • Yes, IRF730STRRPBF is RoHS compliant, making it suitable for environmentally friendly technical solutions.