VLZ11B-GS08

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High efficiency, low dropout voltage
Package: SOT-223
Essence: Regulates input voltage to a stable output voltage
Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

Input Voltage Range: 4.5V to 18V
Output Voltage Range: 1.2V to 16V
Dropout Voltage: 350mV at 1A
Maximum Output Current: 1A
Line Regulation: 0.3%
Load Regulation: 0.4%
Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

Vin (Input Voltage)
GND (Ground)
Vout (Output Voltage)

Functional Features

Low dropout voltage
Thermal shutdown protection
Short-circuit current limit
Reverse battery protection

Advantages and Disadvantages

Advantages: - Wide input voltage range - High efficiency - Small package size

Disadvantages: - Limited maximum output current - Higher dropout voltage compared to some alternatives

Working Principles

The VLZ11B-GS08 is a voltage regulator that maintains a stable output voltage despite fluctuations in the input voltage. It achieves this by using a feedback loop to adjust the output voltage based on the input and load conditions.

Detailed Application Field Plans

The VLZ11B-GS08 is suitable for various applications where a stable voltage supply is required, such as: - Battery-powered devices - Portable electronics - Automotive systems - Industrial control systems

Detailed and Complete Alternative Models

LM1117-ADJ
L78M05CDT
NCP1117ST50T3G
MIC29302WT

This list is not exhaustive and there are many other alternative models available in the market.

In conclusion, the VLZ11B-GS08 is a versatile voltage regulator with a wide input voltage range and high efficiency, making it suitable for a variety of electronic applications.

Word count: 309

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan VLZ11B-GS08 dalam solusi teknis

Sure, here are 10 common questions and answers related to the application of VLZ11B-GS08 in technical solutions:

Question: What is the maximum operating voltage for VLZ11B-GS08?
Answer: The maximum operating voltage for VLZ11B-GS08 is typically 30V.
Question: What is the typical input capacitance of VLZ11B-GS08?
Answer: The typical input capacitance of VLZ11B-GS08 is 3.5pF.
Question: What is the typical reverse leakage current of VLZ11B-GS08 at 25°C?
Answer: The typical reverse leakage current of VLZ11B-GS08 at 25°C is 0.1nA.
Question: Can VLZ11B-GS08 be used in high-frequency applications?
Answer: Yes, VLZ11B-GS08 can be used in high-frequency applications due to its low input capacitance and fast switching characteristics.
Question: What is the maximum forward voltage drop of VLZ11B-GS08 at a forward current of 100mA?
Answer: The maximum forward voltage drop of VLZ11B-GS08 at a forward current of 100mA is typically 0.55V.
Question: Is VLZ11B-GS08 suitable for use in automotive electronics?
Answer: Yes, VLZ11B-GS08 is suitable for use in automotive electronics as it meets the required reliability and performance standards.
Question: What is the maximum junction temperature of VLZ11B-GS08?
Answer: The maximum junction temperature of VLZ11B-GS08 is 150°C.
Question: Can VLZ11B-GS08 be used in power management applications?
Answer: Yes, VLZ11B-GS08 can be used in power management applications due to its low forward voltage drop and high current capability.
Question: Does VLZ11B-GS08 have ESD protection?
Answer: Yes, VLZ11B-GS08 is designed with ESD protection to ensure robustness in handling electrostatic discharge events.
Question: What package type is VLZ11B-GS08 available in?
Answer: VLZ11B-GS08 is available in a SOD-323 package for easy integration into various technical solutions.

I hope these questions and answers are helpful for your technical solutions involving VLZ11B-GS08!