Vishay Semiconductor Diodes Division
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
TZMC10-M-18
Lihat Detail Lembar Data

TZMC10-M-18 Product Overview

Introduction

The TZMC10-M-18 belongs to the category of semiconductor devices and is commonly used in electronic circuits for voltage regulation and protection. This entry provides a comprehensive overview of the product, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Semiconductor device
  • Use: Voltage regulation and protection in electronic circuits
  • Characteristics: Small form factor, high reliability, low leakage current
  • Package: SOD-123 package
  • Essence: Zener diode for voltage regulation
  • Packaging/Quantity: Typically packaged in reels of 3000 units

Specifications

  • Voltage: 18V
  • Power Dissipation: 1W
  • Tolerance: ±5%
  • Operating Temperature Range: -65°C to +150°C

Detailed Pin Configuration

The TZMC10-M-18 has two pins: 1. Anode (A) 2. Cathode (K)

Functional Features

  • Voltage Regulation: The TZMC10-M-18 maintains a constant output voltage under varying load conditions.
  • Overvoltage Protection: It prevents damage to sensitive components by diverting excess voltage.

Advantages and Disadvantages

Advantages

  • Small form factor
  • High reliability
  • Low leakage current
  • Precise voltage regulation

Disadvantages

  • Limited power dissipation capability
  • Sensitivity to temperature variations

Working Principles

The TZMC10-M-18 operates based on the principle of the Zener effect, where it maintains a nearly constant voltage across its terminals when reverse-biased.

Detailed Application Field Plans

The TZMC10-M-18 is widely used in the following applications: - Voltage regulation in power supplies - Overvoltage protection in electronic circuits - Signal clamping and limiting

Detailed and Complete Alternative Models

Some alternative models to TZMC10-M-18 include: - BZX84C18 - 1N4746A - MMSZ5245B

In conclusion, the TZMC10-M-18 is a reliable and compact semiconductor device that finds extensive use in electronic circuits for voltage regulation and protection.

[Word count: 326]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan TZMC10-M-18 dalam solusi teknis

  1. What is TZMC10-M-18?

    • TZMC10-M-18 is a Zener diode with a voltage of 10V and a power dissipation of 500mW.

  2. What are the typical applications of TZMC10-M-18?

    • It is commonly used in voltage regulation, overvoltage protection, and signal clamping circuits.

  3. What is the maximum current TZMC10-M-18 can handle?

    • The maximum current for TZMC10-M-18 is typically around 20mA.

  4. How does TZMC10-M-18 provide overvoltage protection?

    • When the voltage across the diode exceeds its breakdown voltage (10V), it conducts and limits the voltage to 10V, protecting the circuit.

  5. Can TZMC10-M-18 be used in reverse bias?

    • Yes, TZMC10-M-18 can be used in reverse bias as a voltage reference or for voltage regulation purposes.

  6. What is the temperature range for TZMC10-M-18?

    • The operating temperature range for TZMC10-M-18 is typically -65°C to +175°C.

  7. Is TZMC10-M-18 suitable for high-frequency applications?

    • Yes, TZMC10-M-18 is suitable for high-frequency applications due to its fast response time.

  8. Does TZMC10-M-18 require any external components for operation?

    • Typically, TZMC10-M-18 does not require any external components for basic voltage regulation or overvoltage protection.

  9. What is the package type for TZMC10-M-18?

    • TZMC10-M-18 is available in a SOD-123 package, which is a surface-mount package.

  10. Are there any alternative parts that can be used in place of TZMC10-M-18?

    • Yes, other Zener diodes with similar voltage and power ratings can be used as alternatives to TZMC10-M-18 in technical solutions.