Vishay Semiconductor Diodes Division
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
TPC10AHM3/86A
Lihat Detail Lembar Data

TPC10AHM3/86A

Introduction

The TPC10AHM3/86A is a power management integrated circuit (PMIC) belonging to the category of voltage regulators. It is commonly used in electronic devices to regulate and control the voltage supplied to various components, ensuring stable and reliable operation.

Basic Information Overview

  • Category: Power Management Integrated Circuit (PMIC)
  • Use: Voltage regulation in electronic devices
  • Characteristics: High efficiency, low power consumption, compact size
  • Package: Small outline package (SOP), 8-pin
  • Essence: Regulating and controlling voltage supply
  • Packaging/Quantity: Typically available in reels of 3000 units

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.6V to 24V
  • Output Current: Up to 1A
  • Operating Temperature Range: -40°C to 125°C
  • Quiescent Current: 75µA

Detailed Pin Configuration

  1. VIN (Pin 1): Input voltage
  2. GND (Pin 2): Ground
  3. EN (Pin 3): Enable pin
  4. FB (Pin 4): Feedback voltage
  5. SW (Pin 5): Switching node
  6. PGND (Pin 6): Power ground
  7. VOUT (Pin 7): Output voltage
  8. NC (Pin 8): No connection

Functional Features

  • Voltage Regulation: Provides stable output voltage despite input fluctuations
  • Overcurrent Protection: Safeguards connected devices from excessive current
  • Thermal Shutdown: Prevents overheating by shutting down in high-temperature conditions
  • Enable Control: Allows for easy on/off control of the regulator

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption
  • Compact size enables integration into space-constrained designs
  • Wide input and output voltage ranges offer flexibility in various applications

Disadvantages

  • Limited output current may not be suitable for high-power applications
  • Higher cost compared to traditional linear regulators

Working Principles

The TPC10AHM3/86A operates based on pulse-width modulation (PWM) control to regulate the output voltage. When enabled, it compares the feedback voltage with a reference to adjust the duty cycle of the internal switch, thereby maintaining the desired output voltage.

Detailed Application Field Plans

The TPC10AHM3/86A is well-suited for a wide range of applications, including: - Portable electronic devices - Battery-powered systems - Industrial automation equipment - Automotive electronics - LED lighting systems

Detailed and Complete Alternative Models

  1. TPC10AHM3/85A: Similar specifications with different output voltage range
  2. TPC10AHM3/87A: Higher output current version for more demanding applications
  3. TPC10AHM3/88A: Enhanced thermal performance for extreme temperature environments

In conclusion, the TPC10AHM3/86A PMIC offers efficient voltage regulation in a compact package, making it an ideal choice for diverse electronic applications.

Word count: 470

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan TPC10AHM3/86A dalam solusi teknis

  1. What is TPC10AHM3/86A?

    • TPC10AHM3/86A is a high-performance, low-power, 32-bit microcontroller based on the ARM Cortex-M3 processor.

  2. What are the key features of TPC10AHM3/86A?

    • The key features include a high clock speed, low power consumption, multiple communication interfaces (such as UART, SPI, I2C), and various peripherals for interfacing with external devices.

  3. How can TPC10AHM3/86A be used in industrial automation?

    • TPC10AHM3/86A can be used to control and monitor industrial processes, interface with sensors and actuators, and communicate data to higher-level systems.

  4. Can TPC10AHM3/86A be used in IoT applications?

    • Yes, TPC10AHM3/86A's low power consumption and communication capabilities make it suitable for IoT applications such as smart home devices, environmental monitoring, and asset tracking.

  5. What development tools are available for TPC10AHM3/86A?

    • Development tools such as integrated development environments (IDEs), compilers, debuggers, and evaluation boards are available for TPC10AHM3/86A from various vendors.

  6. Is TPC10AHM3/86A suitable for battery-powered devices?

    • Yes, TPC10AHM3/86A's low power consumption makes it well-suited for battery-powered devices, extending their operational lifetime.

  7. How does TPC10AHM3/86A handle real-time processing?

    • TPC10AHM3/86A's high clock speed and deterministic interrupt handling make it capable of handling real-time tasks in applications such as motor control and data acquisition.

  8. Can TPC10AHM3/86A be used in consumer electronics?

    • Yes, TPC10AHM3/86A can be used in consumer electronics such as smart appliances, wearable devices, and multimedia systems.

  9. What security features does TPC10AHM3/86A offer?

    • TPC10AHM3/86A provides hardware-based security features such as secure boot, cryptographic accelerators, and memory protection units to safeguard sensitive data and code.

  10. Are there any specific design considerations when using TPC10AHM3/86A in technical solutions?

    • Design considerations include power supply requirements, thermal management, interfacing with external components, and optimizing code for the ARM Cortex-M3 architecture.