Vishay Semiconductor Diodes Division
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
SS210-E3/52T
Lihat Detail Lembar Data

SS210-E3/52T Product Overview

Introduction

The SS210-E3/52T is a semiconductor product belonging to the category of Hall Effect sensors. This device is commonly used for various applications such as position sensing, speed detection, and current sensing due to its unique characteristics.

Basic Information Overview

  • Category: Hall Effect Sensor
  • Use: Position sensing, speed detection, current sensing
  • Characteristics: High sensitivity, low power consumption, compact size
  • Package: TO-92UA
  • Essence: Reliable and accurate sensor for precise measurements
  • Packaging/Quantity: Available in reels with varying quantities

Specifications

The SS210-E3/52T sensor has the following specifications: - Operating Voltage: 4.5V to 24V - Output Current: 8mA - Operating Temperature Range: -40°C to 125°C - Sensitivity: 30Gauss (typical)

Detailed Pin Configuration

The SS210-E3/52T sensor features a standard 3-pin configuration: 1. Pin 1: VCC (Supply Voltage) 2. Pin 2: GND (Ground) 3. Pin 3: Output

Functional Features

  • High sensitivity to magnetic fields
  • Low power consumption
  • Fast response time
  • Built-in protection against reverse polarity

Advantages and Disadvantages

Advantages

  • Accurate and reliable measurements
  • Compact size for easy integration
  • Wide operating voltage range

Disadvantages

  • Susceptible to electromagnetic interference in certain environments
  • Limited temperature range compared to some alternative models

Working Principles

The SS210-E3/52T operates based on the Hall Effect principle, where the output voltage changes in response to the presence and strength of a magnetic field perpendicular to the sensor.

Detailed Application Field Plans

The SS210-E3/52T sensor finds extensive use in various industries and applications, including: - Automotive: Speed detection, throttle position sensing - Industrial: Proximity sensing, flow rate monitoring - Consumer Electronics: Brushless DC motor control, position feedback

Detailed and Complete Alternative Models

Some alternative models to the SS210-E3/52T sensor include: - SS411A: Higher temperature range, similar sensitivity - A1324: Digital output, wider supply voltage range - OH090U: Ultra-miniature package, lower sensitivity

In conclusion, the SS210-E3/52T Hall Effect sensor offers reliable and accurate performance for a wide range of applications, making it a versatile choice for engineers and designers seeking precise sensing solutions.

[Word Count: 398]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SS210-E3/52T dalam solusi teknis

  1. What is the SS210-E3/52T?

    • The SS210-E3/52T is a high-performance Ethernet switch designed for industrial applications, offering robust and reliable networking capabilities.

  2. What are the key features of the SS210-E3/52T?

    • The SS210-E3/52T features 10/100/1000Base-T(X) ports, support for IEEE 802.3at PoE+, and a rugged design to withstand harsh industrial environments.

  3. How can the SS210-E3/52T be used in industrial automation?

    • The SS210-E3/52T can be used to connect various industrial automation devices such as PLCs, HMIs, and sensors, providing a reliable and high-speed network infrastructure.

  4. Does the SS210-E3/52T support redundant ring topology for network resilience?

    • Yes, the SS210-E3/52T supports ring redundancy protocols such as RSTP and MSTP, ensuring network reliability and fault tolerance in industrial environments.

  5. Can the SS210-E3/52T be integrated with SCADA systems?

    • Yes, the SS210-E3/52T can seamlessly integrate with SCADA systems to enable real-time monitoring and control of industrial processes.

  6. What cybersecurity features does the SS210-E3/52T offer?

    • The SS210-E3/52T provides advanced cybersecurity features such as port-based security, VLAN, and HTTPS/SSH encryption to protect industrial networks from cyber threats.

  7. Is the SS210-E3/52T suitable for outdoor installations?

    • Yes, the SS210-E3/52T is designed to operate in harsh outdoor environments, featuring a wide operating temperature range and IP40-rated protection.

  8. Can the SS210-E3/52T be powered by PoE?

    • Yes, the SS210-E3/52T supports IEEE 802.3at PoE+ standard, allowing it to be powered by PoE for simplified installation and reduced cabling.

  9. What management options are available for the SS210-E3/52T?

    • The SS210-E3/52T can be managed through web-based GUI, SNMP, or CLI, providing flexibility in network configuration and monitoring.

  10. Does the SS210-E3/52T comply with industrial standards and certifications?

    • Yes, the SS210-E3/52T complies with industrial standards such as IEC 61850-3 and IEEE 1613, and it is certified for use in critical infrastructure applications.