Vishay Semiconductor Diodes Division
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
MBRF10H100CT-E3/45
Lihat Detail Lembar Data

MBRF10H100CT-E3/45

Introduction

The MBRF10H100CT-E3/45 is a diode belonging to the category of Schottky rectifier diodes. This entry provides an overview of the basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models of the MBRF10H100CT-E3/45.

Basic Information Overview

  • Category: Schottky rectifier diode
  • Use: It is used as a high-efficiency rectifier in power supply applications.
  • Characteristics: The diode exhibits low forward voltage drop and fast switching capabilities, making it suitable for high-frequency applications.
  • Package: The diode is typically available in a TO-220AB package.
  • Essence: The essence of the MBRF10H100CT-E3/45 lies in its ability to provide efficient rectification with minimal power loss.
  • Packaging/Quantity: It is commonly packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Voltage Rating: 100V
  • Current Rating: 10A
  • Forward Voltage Drop: Typically around 0.55V at 5A
  • Reverse Leakage Current: Maximum of 500µA at 100V
  • Operating Temperature Range: -65°C to 175°C
  • Storage Temperature Range: -65°C to 175°C

Detailed Pin Configuration

The MBRF10H100CT-E3/45 typically has three pins: 1. Anode (A) 2. Cathode (K) 3. Thermal pad (T)

Functional Features

  • Low forward voltage drop
  • Fast switching speed
  • High current capability
  • Low reverse leakage current

Advantages and Disadvantages

Advantages

  • High efficiency due to low forward voltage drop
  • Suitable for high-frequency applications
  • Enhanced thermal performance due to the presence of a thermal pad

Disadvantages

  • Higher cost compared to standard silicon rectifiers
  • Limited voltage rating compared to some other rectifier diodes

Working Principles

The MBRF10H100CT-E3/45 operates based on the Schottky barrier principle, where the metal-semiconductor junction allows for faster switching and lower forward voltage drop compared to conventional PN-junction diodes.

Detailed Application Field Plans

The MBRF10H100CT-E3/45 finds applications in various fields, including: - Switching power supplies - DC-DC converters - Reverse polarity protection circuits - Freewheeling diodes in inductive load applications

Detailed and Complete Alternative Models

Some alternative models to the MBRF10H100CT-E3/45 include: - STPS10H100D (STMicroelectronics) - SS10100CT (Vishay) - SB10100CT (Diodes Incorporated) - SR10100CT (Fairchild Semiconductor)

In summary, the MBRF10H100CT-E3/45 is a Schottky rectifier diode with specific characteristics that make it suitable for high-efficiency rectification in various power supply applications. Its low forward voltage drop, fast switching speed, and high current capability position it as a valuable component in modern electronic designs.

Word Count: 470

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MBRF10H100CT-E3/45 dalam solusi teknis

  1. What is the MBRF10H100CT-E3/45 diode used for?

    • The MBRF10H100CT-E3/45 diode is commonly used as a rectifier in power supply and voltage regulation applications.

  2. What are the key specifications of the MBRF10H100CT-E3/45 diode?

    • The MBRF10H100CT-E3/45 diode has a maximum average forward current of 10A, a reverse voltage of 100V, and a low forward voltage drop.

  3. Can the MBRF10H100CT-E3/45 diode be used in high-frequency applications?

    • Yes, the MBRF10H100CT-E3/45 diode is suitable for high-frequency switching due to its fast recovery time and low reverse recovery charge.

  4. How does the MBRF10H100CT-E3/45 diode perform in temperature extremes?

    • The MBRF10H100CT-E3/45 diode has a wide operating temperature range and is designed to perform reliably in both high and low-temperature environments.

  5. Is the MBRF10H100CT-E3/45 diode suitable for automotive applications?

    • Yes, the MBRF10H100CT-E3/45 diode is often used in automotive systems such as alternators and voltage regulators due to its rugged construction and high reliability.

  6. What are the typical applications of the MBRF10H100CT-E3/45 diode?

    • Typical applications include DC/DC converters, freewheeling diodes, OR-ing diodes, and reverse battery protection circuits.

  7. Does the MBRF10H100CT-E3/45 diode require a heatsink for operation?

    • The need for a heatsink depends on the specific application and the amount of power dissipation. In high-power applications, a heatsink may be necessary.

  8. What are the advantages of using the MBRF10H100CT-E3/45 diode over other diodes?

    • The MBRF10H100CT-E3/45 diode offers low forward voltage drop, high surge capability, and excellent thermal performance, making it ideal for demanding applications.

  9. Can the MBRF10H100CT-E3/45 diode be used in parallel for higher current handling?

    • Yes, the MBRF10H100CT-E3/45 diode can be used in parallel to increase the overall current-handling capacity in high-current applications.

  10. Are there any recommended layout considerations when using the MBRF10H100CT-E3/45 diode?

    • It is important to minimize the length of the traces between the diode and other components to reduce parasitic inductance and ensure optimal performance. Additionally, proper thermal management is essential for maximizing the diode's reliability and lifespan.