Vishay Semiconductor Diodes Division
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
GBL08L-5701E3/51
Lihat Detail Lembar Data

GBL08L-5701E3/51

Product Overview

Category: Integrated Circuit
Use: Power Management IC
Characteristics: Low power consumption, high efficiency
Package: 8-pin SOIC
Essence: Regulates and manages power supply
Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage: Adjustable from 0.8V to 24V
  • Maximum Output Current: 500mA
  • Quiescent Current: 100µA
  • Switching Frequency: 2.2MHz

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. SW (Switch Node)
  3. FB (Feedback)
  4. GND (Ground)
  5. EN (Enable)
  6. SS (Soft Start)
  7. PG (Power Good)
  8. VOUT (Output Voltage)

Functional Features

  • Wide input voltage range
  • Adjustable output voltage
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection

Advantages and Disadvantages

Advantages: - High efficiency - Small package size - Wide input voltage range

Disadvantages: - Limited maximum output current - Requires external components for certain functions

Working Principles

The GBL08L-5701E3/51 is a step-down (buck) converter that regulates the input voltage to a lower, adjustable output voltage using high-frequency switching.

Detailed Application Field Plans

This IC is suitable for various applications including: - Battery-powered devices - Portable electronics - Industrial control systems - Automotive electronics

Detailed and Complete Alternative Models

  • LM2675
  • TPS5430

Note: The information provided is for reference purposes only. Users are advised to refer to the official datasheet for accurate specifications and usage guidelines.

Word Count: 298

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan GBL08L-5701E3/51 dalam solusi teknis

  1. What is the GBL08L-5701E3/51 component used for in technical solutions?

    • The GBL08L-5701E3/51 is a bridge rectifier diode commonly used to convert alternating current (AC) to direct current (DC) in various electronic applications.

  2. What are the electrical specifications of the GBL08L-5701E3/51?

    • The GBL08L-5701E3/51 typically has a maximum average forward rectified current of 8A, a peak forward surge current of 200A, and a maximum reverse voltage of 1000V.

  3. In what types of circuits can the GBL08L-5701E3/51 be used?

    • The GBL08L-5701E3/51 can be utilized in power supply circuits, battery chargers, and other applications requiring AC to DC conversion.

  4. What are the key features of the GBL08L-5701E3/51 that make it suitable for technical solutions?

    • This component is known for its high current capability, low forward voltage drop, and reliable performance in demanding environments.

  5. Are there any specific thermal considerations when using the GBL08L-5701E3/51?

    • It's important to ensure proper heat dissipation as the GBL08L-5701E3/51 may generate heat during operation, especially at higher currents.

  6. Can the GBL08L-5701E3/51 be used in automotive applications?

    • Yes, the GBL08L-5701E3/51 is suitable for automotive electronics such as alternator rectification and battery charging systems.

  7. What are the typical mounting options for the GBL08L-5701E3/51?

    • The GBL08L-5701E3/51 is commonly available in through-hole or surface mount packages for easy integration into circuit designs.

  8. Is the GBL08L-5701E3/51 sensitive to reverse voltage spikes?

    • Yes, it's important to consider protection measures against reverse voltage transients to prevent damage to the GBL08L-5701E3/51.

  9. Can the GBL08L-5701E3/51 be used in high-frequency applications?

    • While it can function in some high-frequency circuits, the GBL08L-5701E3/51 is more commonly employed in lower frequency power supply designs.

  10. What are some common failure modes associated with the GBL08L-5701E3/51?

    • Overheating due to excessive current, reverse voltage breakdown, and physical damage from mechanical stress are potential failure modes to be aware of.