Vishay Dale
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
NTHS0603N17N1683JF
Lihat Detail Lembar Data

NTHS0603N17N1683JF

Product Overview

Category

The NTHS0603N17N1683JF belongs to the category of surface mount resistors.

Use

It is commonly used in electronic circuits to limit current or divide voltages.

Characteristics

  • Small size
  • High precision
  • Wide resistance range
  • Suitable for high-density circuit designs

Package

The NTHS0603N17N1683JF is typically available in tape and reel packaging.

Essence

This resistor is essential for maintaining precise electrical characteristics within a circuit.

Packaging/Quantity

It is usually packaged in reels containing a specific quantity, such as 5000 units per reel.

Specifications

  • Resistance: 1683 ohms
  • Power Rating: 0.1W
  • Tolerance: ±5%
  • Temperature Coefficient: ±200ppm/°C

Detailed Pin Configuration

The NTHS0603N17N1683JF has two terminals, with no polarity distinction.

Functional Features

  • Precise resistance value
  • Stable performance over a wide temperature range
  • Low noise and low inductance

Advantages

  • Small footprint
  • High precision
  • Suitable for high-frequency applications

Disadvantages

  • Limited power handling capacity
  • Sensitive to overvoltage conditions

Working Principles

The NTHS0603N17N1683JF operates based on the principle of converting electrical energy into heat, thereby limiting current flow through a circuit.

Detailed Application Field Plans

This resistor is commonly used in: - RF circuits - Sensor interfaces - Precision analog circuits

Detailed and Complete Alternative Models

  • NTHS0603N17N1002JF
  • NTHS0603N17N2156JF
  • NTHS0603N17N3010JF

In conclusion, the NTHS0603N17N1683JF is a surface mount resistor with high precision and a wide resistance range, making it suitable for various electronic applications, especially those requiring compact designs and precise electrical characteristics.

[Word count: 298]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan NTHS0603N17N1683JF dalam solusi teknis

  1. What is NTHS0603N17N1683JF?

    • NTHS0603N17N1683JF is a surface mount chip resistor used in various technical solutions.

  2. What are the key specifications of NTHS0603N17N1683JF?

    • The key specifications include a resistance value of 168 kΩ, a power rating of 0.1W, and a tolerance of ±5%.

  3. In what technical applications can NTHS0603N17N1683JF be used?

    • NTHS0603N17N1683JF can be used in applications such as voltage dividers, sensor circuits, and precision analog circuits.

  4. What are the temperature characteristics of NTHS0603N17N1683JF?

    • NTHS0603N17N1683JF has a temperature coefficient of ±100 ppm/°C.

  5. Is NTHS0603N17N1683JF suitable for high-frequency applications?

    • Yes, NTHS0603N17N1683JF is suitable for high-frequency applications due to its stable performance.

  6. Can NTHS0603N17N1683JF be used in automotive electronics?

    • Yes, NTHS0603N17N1683JF is suitable for use in automotive electronics due to its reliability and stability.

  7. What is the recommended soldering profile for NTHS0603N17N1683JF?

    • The recommended soldering profile includes a peak temperature of 260°C for 10 seconds.

  8. Does NTHS0603N17N1683JF have any special handling requirements?

    • NTHS0603N17N1683JF should be handled with ESD precautions to prevent damage.

  9. Are there any potential failure modes associated with NTHS0603N17N1683JF?

    • Potential failure modes include excessive power dissipation and mechanical stress during assembly.

  10. Where can I find detailed application notes for using NTHS0603N17N1683JF in technical solutions?

    • Detailed application notes for NTHS0603N17N1683JF can be found on the manufacturer's website or in the product datasheet.