Vishay Beyschlag
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
MFU1206FF01000P100
Lihat Detail Lembar Data

MFU1206FF01000P100

Product Overview

  • Category: Electronic Components
  • Use: This product is a surface mount resistor used in electronic circuits to limit the flow of electric current.
  • Characteristics: The MFU1206FF01000P100 is a precision resistor with a high power rating and low temperature coefficient, making it suitable for various applications. It comes in a compact surface mount package.
  • Package: Surface Mount
  • Essence: Precision resistance for electronic circuits
  • Packaging/Quantity: Typically packaged in reels of 1000 units.

Specifications

  • Resistance Value: 10 Ohms
  • Power Rating: 1 Watt
  • Tolerance: ±1%
  • Temperature Coefficient: 100 ppm/°C
  • Operating Temperature Range: -55°C to +155°C

Detailed Pin Configuration

The MFU1206FF01000P100 has two terminals for soldering onto the circuit board. The pin configuration is as follows: - Pin 1: Connection point 1 - Pin 2: Connection point 2

Functional Features

  • High precision and stability
  • Low temperature coefficient
  • Compact size for space-constrained designs
  • Suitable for high-power applications

Advantages

  • Precise resistance value
  • Minimal impact from temperature variations
  • Small form factor
  • High power handling capability

Disadvantages

  • Sensitive to mechanical stress due to surface mount design
  • May require careful handling during assembly

Working Principles

The MFU1206FF01000P100 operates by providing a specific resistance to the flow of electric current in a circuit, thereby controlling the current and voltage levels within the desired range.

Detailed Application Field Plans

This resistor is commonly used in various electronic devices and equipment, including: - Power supplies - Audio amplifiers - LED lighting - Industrial control systems

Detailed and Complete Alternative Models

  • MFU1206FF02000P100: 20 Ohm, 1 Watt, ±1%, 100 ppm/°C
  • MFU1206FF00500P100: 5 Ohm, 1 Watt, ±1%, 100 ppm/°C
  • MFU1206FF01500P100: 15 Ohm, 1 Watt, ±1%, 100 ppm/°C

Note: The alternative models listed above are examples and not an exhaustive list.

This entry provides a comprehensive overview of the MFU1206FF01000P100, covering its basic information, specifications, features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MFU1206FF01000P100 dalam solusi teknis

  1. What is MFU1206FF01000P100?

    • MFU1206FF01000P100 is a surface mount resistor with a resistance value of 10 ohms and a power rating of 1 watt.

  2. What are the typical applications of MFU1206FF01000P100?

    • MFU1206FF01000P100 is commonly used in electronic circuits, power supplies, and various technical solutions where a 10-ohm resistor with a 1-watt power rating is required.

  3. Can MFU1206FF01000P100 be used for current sensing?

    • Yes, MFU1206FF01000P100 can be used for current sensing applications due to its low resistance value and power handling capability.

  4. Is MFU1206FF01000P100 suitable for high-frequency applications?

    • MFU1206FF01000P100 has a wide frequency response and can be used in high-frequency applications within its power rating limits.

  5. What is the maximum voltage rating for MFU1206FF01000P100?

    • The maximum voltage rating for MFU1206FF01000P100 is typically around 200 volts.

  6. Does MFU1206FF01000P100 require any special heat sinking or cooling?

    • For most applications within its power rating, MFU1206FF01000P100 does not require special heat sinking or cooling.

  7. Can MFU1206FF01000P100 be used in automotive electronics?

    • Yes, MFU1206FF01000P100 can be used in automotive electronics, provided it meets the specific requirements and standards for automotive components.

  8. What are the temperature coefficients available for MFU1206FF01000P100?

    • MFU1206FF01000P100 is available with different temperature coefficients, such as 100 ppm/°C or 200 ppm/°C, to suit various temperature stability requirements.

  9. Are there any recommended soldering techniques for MFU1206FF01000P100?

    • It is recommended to follow standard surface mount soldering techniques and guidelines when soldering MFU1206FF01000P100 onto a PCB.

  10. Where can I find detailed specifications and datasheets for MFU1206FF01000P100?

    • Detailed specifications and datasheets for MFU1206FF01000P100 can be obtained from the manufacturer's website or authorized distributors.