Lihat spesifikasi untuk detail produk.
NTCLE100E3681GB0
Product Overview
Category
The NTCLE100E3681GB0 belongs to the category of NTC thermistors.
Use
It is commonly used for temperature sensing and control applications.
Characteristics
- High sensitivity to temperature changes
- Wide operating temperature range
- Small size for easy integration into electronic circuits
Package
The NTCLE100E3681GB0 is typically available in a small, surface-mount package.
Essence
This thermistor is essential for precise temperature measurement and regulation in various electronic devices and systems.
Packaging/Quantity
It is usually supplied in reels containing a specific quantity, such as 1000 pieces per reel.
Specifications
- Resistance at 25°C: 3.681 kΩ
- Operating Temperature Range: -40°C to 125°C
- Tolerance: ±1%
Detailed Pin Configuration
The NTCLE100E3681GB0 has two pins for connection to the circuit. The pin configuration is as follows: - Pin 1: Connection point for one end of the thermistor - Pin 2: Connection point for the other end of the thermistor
Functional Features
- Non-linear resistance-temperature characteristics
- Rapid response to temperature changes
- Stable and reliable performance over time
Advantages and Disadvantages
Advantages
- High sensitivity enables precise temperature measurements
- Wide operating temperature range allows for versatile applications
- Small size facilitates integration into compact designs
Disadvantages
- Non-linear characteristics may require additional calibration in some applications
- Sensitivity to environmental factors such as humidity and contamination
Working Principles
The NTCLE100E3681GB0 operates based on the principle of negative temperature coefficient (NTC), where its resistance decreases as the temperature increases. This property allows it to be used for temperature sensing and control in various electronic systems.
Detailed Application Field Plans
The NTCLE100E3681GB0 is widely used in the following applications: - Temperature monitoring and control in consumer electronics - Thermal management in automotive systems - Industrial process control and monitoring - Medical equipment for temperature sensing
Detailed and Complete Alternative Models
Some alternative models to the NTCLE100E3681GB0 include: - NTCLE100E3103JB0: Similar characteristics with a different resistance value - NTCLE100E3473JB0: Higher resistance variant for specific applications - NTCLE100E3223JB0: Lower resistance variant suitable for certain designs
In conclusion, the NTCLE100E3681GB0 NTC thermistor offers high sensitivity and a wide operating temperature range, making it suitable for diverse temperature sensing and control applications across various industries.
[Word count: 398]
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan NTCLE100E3681GB0 dalam solusi teknis
What is the NTCLE100E3681GB0 used for?
- The NTCLE100E3681GB0 is a thermistor commonly used for temperature sensing and control in various technical solutions.
What is the operating temperature range of NTCLE100E3681GB0?
- The operating temperature range of NTCLE100E3681GB0 is typically -55°C to 150°C.
How does NTCLE100E3681GB0 work as a temperature sensor?
- NTCLE100E3681GB0 operates based on the principle of resistance change with temperature, providing a reliable indication of the ambient temperature.
What are the typical applications of NTCLE100E3681GB0 in technical solutions?
- NTCLE100E3681GB0 is commonly used in applications such as temperature monitoring in industrial equipment, HVAC systems, automotive electronics, and battery management systems.
What is the resistance value at 25°C for NTCLE100E3681GB0?
- The resistance value at 25°C for NTCLE100E3681GB0 is typically 3.68 kΩ.
Can NTCLE100E3681GB0 be used for temperature compensation in electronic circuits?
- Yes, NTCLE100E3681GB0 can be utilized for temperature compensation in electronic circuits due to its predictable resistance-temperature characteristics.
Is NTCLE100E3681GB0 suitable for high-precision temperature measurements?
- While NTCLE100E3681GB0 offers good accuracy, it may not be ideal for high-precision temperature measurements due to its inherent tolerance and non-linearity.
What are the key considerations for integrating NTCLE100E3681GB0 into a technical solution?
- Key considerations include proper calibration, thermal isolation, and protection from moisture or harsh environments to ensure accurate and reliable temperature sensing.
Can NTCLE100E3681GB0 be directly interfaced with microcontrollers or analog circuits?
- Yes, NTCLE100E3681GB0 can be directly interfaced with microcontrollers or analog circuits by incorporating appropriate signal conditioning and amplification.
Are there any specific soldering or mounting guidelines for NTCLE100E3681GB0?
- It is recommended to follow the manufacturer's guidelines for soldering and mounting to prevent damage to the thermistor and ensure consistent performance in technical solutions.