US Sensor/Littelfuse Inc
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
PR222J2
Lihat Detail Lembar Data

PR222J2

Product Overview

Category: Electronic Component
Use: PR222J2 is a ceramic capacitor used in electronic circuits for filtering, bypassing, and coupling applications.
Characteristics: It has high stability, low losses, and excellent frequency response.
Package: The PR222J2 comes in a standard ceramic disc package.
Essence: This capacitor is essential for maintaining signal integrity and reducing noise in electronic circuits.
Packaging/Quantity: Typically sold in reels or bulk packaging.

Specifications

  • Capacitance: 0.22µF
  • Voltage Rating: 50V
  • Tolerance: ±5%
  • Temperature Coefficient: X7R

Detailed Pin Configuration

The PR222J2 is a two-terminal device with no polarity. It has a simple disc-shaped body with leads extending from the center on opposite sides.

Functional Features

  • High stability over a wide temperature range
  • Low equivalent series resistance (ESR)
  • Excellent frequency response

Advantages and Disadvantages

Advantages: - Stable performance - Low losses - Compact size

Disadvantages: - Limited capacitance range - Sensitive to mechanical stress

Working Principles

The PR222J2 operates based on the principle of energy storage in an electric field. When a voltage is applied across its terminals, it stores energy in the form of an electrostatic field between its conductive plates.

Detailed Application Field Plans

The PR222J2 is commonly used in: - Power supply filtering - Signal coupling - Decoupling in digital circuits - RF tuning circuits

Detailed and Complete Alternative Models

  1. PR221J1 - 0.1µF, 25V, X7R
  2. PR223J3 - 0.33µF, 100V, X7R
  3. PR224J4 - 0.47µF, 50V, X7R
  4. PR225J5 - 1.0µF, 50V, X7R

In conclusion, the PR222J2 ceramic capacitor is a reliable component with stable performance and is widely used in various electronic applications for signal integrity and noise reduction.

Word count: 263

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan PR222J2 dalam solusi teknis

  1. What is PR222J2?

    • PR222J2 is a two-component epoxy adhesive known for its high strength and excellent chemical resistance.

  2. What are the typical applications of PR222J2?

    • PR222J2 is commonly used in bonding metal, composite, and plastic components in aerospace, automotive, and industrial applications.

  3. What is the recommended surface preparation for using PR222J2?

    • It is recommended to clean and degrease the surfaces to be bonded before applying PR222J2 for optimal adhesion.

  4. What is the curing time for PR222J2?

    • The curing time for PR222J2 can vary based on temperature and application, but typically ranges from 4 to 8 hours at room temperature.

  5. Can PR222J2 be used for outdoor applications?

    • Yes, PR222J2 is suitable for outdoor use as it offers good resistance to weathering and UV exposure.

  6. Is PR222J2 resistant to chemicals and solvents?

    • Yes, PR222J2 demonstrates excellent resistance to a wide range of chemicals and solvents, making it suitable for demanding environments.

  7. What is the maximum operating temperature for PR222J2?

    • PR222J2 can withstand continuous exposure to temperatures up to 250°F (121°C) once fully cured.

  8. Can PR222J2 be used for structural bonding?

    • Yes, PR222J2 is often used for structural bonding due to its high strength and durability.

  9. Does PR222J2 require special handling or storage conditions?

    • It is recommended to store PR222J2 in a cool, dry place and follow proper handling procedures to ensure product integrity.

  10. Is PR222J2 compatible with other materials such as paints or coatings?

    • PR222J2 is generally compatible with most paints and coatings, but compatibility testing is recommended for specific applications.