Toshiba Semiconductor and Storage
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
DSR01S30SC(TPL3)
Lihat Detail Lembar Data

DSR01S30SC(TPL3) Product Overview

Introduction

The DSR01S30SC(TPL3) is a semiconductor device belonging to the category of Schottky Barrier Diodes (SBD). This product is widely used in various electronic applications due to its unique characteristics and functional features. In this entry, we will provide an overview of the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the DSR01S30SC(TPL3).

Basic Information Overview

  • Category: Schottky Barrier Diode (SBD)
  • Use: Rectification and voltage clamping in electronic circuits
  • Characteristics: Low forward voltage drop, high switching speed, low leakage current
  • Package: Surface Mount Device (SMD)
  • Essence: Semiconductor device for power management
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Forward Voltage: 0.3V
  • Reverse Voltage: 30V
  • Average Rectified Current: 1A
  • Operating Temperature Range: -65°C to +125°C
  • Storage Temperature Range: -65°C to +150°C

Detailed Pin Configuration

The DSR01S30SC(TPL3) has a standard SOD-323 package with two pins. Pin 1 is the anode (A) and Pin 2 is the cathode (K).

Functional Features

  • Low forward voltage drop ensures minimal power loss
  • High switching speed enables efficient circuit operation
  • Low leakage current contributes to improved energy efficiency

Advantages and Disadvantages

Advantages

  • Enhanced power efficiency
  • Compact SMD package for space-constrained designs
  • Suitable for high-frequency applications

Disadvantages

  • Limited reverse voltage compared to other diode types
  • Sensitivity to temperature variations

Working Principles

The DSR01S30SC(TPL3) operates based on the Schottky barrier principle, where a metal-semiconductor junction is formed to enable fast switching and low forward voltage drop.

Detailed Application Field Plans

The DSR01S30SC(TPL3) finds extensive use in the following applications: - Switching power supplies - Voltage clamping circuits - Reverse polarity protection - High-frequency rectification

Detailed and Complete Alternative Models

  • DSR02S40SC(TPL3): Similar characteristics with higher reverse voltage rating
  • DSR04S60SC(TPL3): Higher current handling capability with comparable forward voltage drop

In conclusion, the DSR01S30SC(TPL3) Schottky Barrier Diode offers a balance of performance and size, making it suitable for a wide range of electronic applications. Its unique characteristics and functional features make it a preferred choice for designers aiming for high efficiency and compact designs.

[Word Count: 410]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan DSR01S30SC(TPL3) dalam solusi teknis

  1. What is DSR01S30SC(TPL3)?

    • DSR01S30SC(TPL3) is a high-speed, low-capacitance diode array designed to protect sensitive electronics from damage due to electrostatic discharge (ESD), electrical fast transients (EFT), and lightning-induced surges.

  2. What are the key features of DSR01S30SC(TPL3)?

    • The key features of DSR01S30SC(TPL3) include its low capacitance, high surge capability, and fast response time, making it suitable for use in high-speed data lines and other sensitive electronic circuits.

  3. How does DSR01S30SC(TPL3) protect against ESD?

    • DSR01S30SC(TPL3) provides protection against ESD by diverting transient currents away from sensitive components and limiting the voltage across them to safe levels.

  4. In what applications can DSR01S30SC(TPL3) be used?

    • DSR01S30SC(TPL3) is commonly used in applications such as USB ports, HDMI interfaces, Ethernet ports, and other high-speed data lines where protection against ESD and surge events is critical.

  5. What is the maximum surge capability of DSR01S30SC(TPL3)?

    • DSR01S30SC(TPL3) has a surge capability of up to 30A, making it suitable for protecting against lightning-induced surges and other high-energy transient events.

  6. Does DSR01S30SC(TPL3) introduce any signal degradation?

    • No, DSR01S30SC(TPL3) has low capacitance and fast response time, minimizing signal degradation in high-speed data lines.

  7. What is the operating voltage range of DSR01S30SC(TPL3)?

    • DSR01S30SC(TPL3) has an operating voltage range of 5V to 24V, making it compatible with a wide range of electronic systems.

  8. Is DSR01S30SC(TPL3) RoHS compliant?

    • Yes, DSR01S30SC(TPL3) is RoHS compliant, ensuring that it meets environmental standards for hazardous substance restrictions.

  9. Can DSR01S30SC(TPL3) be used in automotive applications?

    • Yes, DSR01S30SC(TPL3) is suitable for automotive applications where protection against ESD and surge events is necessary.

  10. Are there any application notes or reference designs available for using DSR01S30SC(TPL3) in technical solutions?

    • Yes, application notes and reference designs are available to assist engineers in integrating DSR01S30SC(TPL3) into their technical solutions, ensuring proper usage and optimal performance.