Toshiba Semiconductor and Storage
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
CMS05(TE12L,Q,M)
Lihat Detail Lembar Data

CMS05(TE12L,Q,M)

Product Overview

  • Belongs to: Electronic Components
  • Category: Voltage Regulator
  • Use: Regulates voltage in electronic circuits
  • Characteristics: Small form factor, high efficiency, low noise
  • Package: SOT-23
  • Essence: Stabilizing voltage output
  • Packaging/Quantity: Tape and Reel

Specifications

  • Input Voltage Range: 4.3V to 18V
  • Output Voltage Range: 1.2V to 16V
  • Output Current: 500mA
  • Quiescent Current: 75µA
  • Dropout Voltage: 300mV at 100mA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  • Pin 1 (VIN): Input Voltage
  • Pin 2 (GND): Ground
  • Pin 3 (VOUT): Output Voltage

Functional Features

  • Internal Thermal Shutdown
  • Current Limit Protection
  • Stable with Low ESR Capacitors

Advantages

  • Small package size
  • Wide input voltage range
  • Low quiescent current

Disadvantages

  • Limited output current
  • Higher dropout voltage compared to some alternatives

Working Principles

The CMS05(TE12L,Q,M) operates by comparing the output voltage to a reference voltage and adjusting the pass element to maintain a stable output.

Detailed Application Field Plans

  • Battery-powered devices
  • Portable electronics
  • IoT devices

Detailed and Complete Alternative Models

  • LM1117
  • MCP1703
  • XC6206

This concludes the detailed entry for CMS05(TE12L,Q,M), covering its product information, specifications, features, advantages, disadvantages, working principles, application field plans, and alternative models.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan CMS05(TE12L,Q,M) dalam solusi teknis

  1. What is CMS05(TE12L,Q,M)?

    • CMS05(TE12L,Q,M) is a technical standard that specifies requirements for the design, construction, and operation of pressure vessels in various industries.

  2. What are the key design requirements specified by CMS05(TE12L,Q,M)?

    • The key design requirements include material selection, pressure ratings, welding procedures, non-destructive testing, and safety factors.

  3. How does CMS05(TE12L,Q,M) impact the construction of pressure vessels?

    • CMS05(TE12L,Q,M) sets guidelines for the fabrication and assembly of pressure vessels to ensure they meet safety and performance standards.

  4. What are the implications of CMS05(TE12L,Q,M) on quality control?

    • CMS05(TE12L,Q,M) mandates rigorous quality control measures throughout the manufacturing process to verify compliance with the standard's requirements.

  5. Is CMS05(TE12L,Q,M) applicable to all types of pressure vessels?

    • Yes, CMS05(TE12L,Q,M) applies to a wide range of pressure vessels used in industries such as oil and gas, chemical processing, and power generation.

  6. How does CMS05(TE12L,Q,M) address safety considerations in pressure vessel design?

    • The standard includes provisions for safety features, such as pressure relief devices, overpressure protection, and material toughness requirements.

  7. Are there specific testing and inspection requirements outlined in CMS05(TE12L,Q,M)?

    • Yes, CMS05(TE12L,Q,M) specifies testing methods, such as hydrostatic testing, radiographic examination, and ultrasonic inspection, to ensure the integrity of pressure vessels.

  8. What documentation is required to demonstrate compliance with CMS05(TE12L,Q,M)?

    • Manufacturers must maintain comprehensive records of materials, fabrication processes, inspections, and test results to prove adherence to the standard.

  9. How does CMS05(TE12L,Q,M) address environmental considerations in pressure vessel design?

    • The standard may include provisions for corrosion protection, leak detection, and environmental impact mitigation in pressure vessel design and operation.

  10. What are the consequences of non-compliance with CMS05(TE12L,Q,M)?

    • Non-compliance with CMS05(TE12L,Q,M) can result in safety hazards, regulatory penalties, and reputational damage for manufacturers and operators of pressure vessels.