Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC9265C1814R-G

XC9265C1814R-G

Product Overview

Category

XC9265C1814R-G belongs to the category of integrated circuits (ICs).

Use

It is commonly used as a voltage regulator in electronic devices.

Characteristics

  • Voltage regulation capability
  • Compact package size
  • Low power consumption
  • High efficiency

Package

XC9265C1814R-G is available in a small surface mount package.

Essence

The essence of XC9265C1814R-G lies in its ability to regulate voltage levels effectively and efficiently.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 1000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.0V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC9265C1814R-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • Voltage regulation: XC9265C1814R-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to prevent damage to the device and connected components.
  • Thermal shutdown: In case of excessive temperature, the device shuts down to avoid overheating.

Advantages and Disadvantages

Advantages

  • Small package size allows for space-saving designs.
  • Low power consumption contributes to energy efficiency.
  • High efficiency results in minimal power loss during voltage regulation.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Dropout voltage of 200mV may affect performance in low-voltage scenarios.

Working Principles

XC9265C1814R-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. This is achieved through a combination of active and passive components within the IC.

Detailed Application Field Plans

XC9265C1814R-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC9265C1814R-G are: - LM1117-3.3 - LT1763-3.3 - MCP1700-3302E/TO

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

In conclusion, XC9265C1814R-G is a compact and efficient voltage regulator IC that finds applications in a wide range of electronic devices. Its small package size, low power consumption, and high efficiency make it a popular choice among designers. However, its limited maximum output current and dropout voltage should be taken into consideration when selecting this product for high-power or low-voltage applications.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC9265C1814R-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC9265C1814R-G in technical solutions:

  1. Q: What is XC9265C1814R-G? A: XC9265C1814R-G is a voltage regulator IC (integrated circuit) commonly used in electronic circuits to regulate and stabilize voltage levels.

  2. Q: What is the input voltage range for XC9265C1814R-G? A: The input voltage range for XC9265C1814R-G is typically between 2.5V and 6.0V.

  3. Q: What is the output voltage range for XC9265C1814R-G? A: The output voltage range for XC9265C1814R-G can be set between 0.8V and 5.0V using external resistors.

  4. Q: What is the maximum output current of XC9265C1814R-G? A: The maximum output current of XC9265C1814R-G is 300mA, which makes it suitable for low-power applications.

  5. Q: Is XC9265C1814R-G a linear or switching regulator? A: XC9265C1814R-G is a linear regulator, meaning it uses a linear pass element to regulate the output voltage.

  6. Q: Does XC9265C1814R-G require any external components for operation? A: Yes, XC9265C1814R-G requires a few external components such as input/output capacitors and resistors to set the output voltage.

  7. Q: Can XC9265C1814R-G handle overcurrent or thermal protection? A: Yes, XC9265C1814R-G has built-in overcurrent and thermal protection features to safeguard against excessive current or temperature.

  8. Q: What is the typical dropout voltage of XC9265C1814R-G? A: The typical dropout voltage of XC9265C1814R-G is around 200mV at a load current of 100mA.

  9. Q: Can XC9265C1814R-G operate in a wide temperature range? A: Yes, XC9265C1814R-G can operate in a temperature range of -40°C to +85°C, making it suitable for various environments.

  10. Q: What are some common applications of XC9265C1814R-G? A: XC9265C1814R-G is commonly used in battery-powered devices, portable electronics, IoT devices, and other low-power applications where voltage regulation is required.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications for XC9265C1814R-G.