Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC61CC1502MR-G

XC61CC1502MR-G

Product Overview

Category

XC61CC1502MR-G belongs to the category of electronic components.

Use

XC61CC1502MR-G is commonly used in electronic circuits for voltage detection and power management purposes.

Characteristics

  • Voltage detection range: 1.5V to 6.0V
  • Low quiescent current: 1µA (typical)
  • High accuracy: ±2%
  • Small package size: SOT-23-3
  • RoHS compliant

Package and Quantity

XC61CC1502MR-G is packaged in a SOT-23-3 package. It is typically sold in reels containing 3000 units.

Specifications

  • Input Voltage Range: 1.5V to 6.0V
  • Output Voltage: High or Low
  • Quiescent Current: 1µA (typical)
  • Accuracy: ±2%
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

XC61CC1502MR-G has three pins arranged as follows:

```


| | --| VDD|-- Pin 1 (Input Voltage) --| OUT|-- Pin 2 (Output Voltage) --| GND|-- Pin 3 (Ground) |____| ```

Functional Features

XC61CC1502MR-G is designed to detect the input voltage level and provide a corresponding output signal. When the input voltage exceeds a certain threshold, the output goes high, and when it falls below the threshold, the output goes low. This functionality makes it suitable for various power management applications.

Advantages and Disadvantages

Advantages

  • Wide input voltage range
  • Low quiescent current consumption
  • High accuracy
  • Small package size allows for space-saving designs
  • RoHS compliant, environmentally friendly

Disadvantages

  • Limited output voltage options (high or low)

Working Principles

XC61CC1502MR-G utilizes a voltage divider network and a comparator to detect the input voltage level. The internal reference voltage is compared with the divided voltage, and the output state is determined accordingly.

Application Field Plans

XC61CC1502MR-G can be used in various applications, including but not limited to: - Battery-powered devices - Portable electronics - Power management systems - Voltage monitoring circuits

Alternative Models

Some alternative models that offer similar functionality to XC61CC1502MR-G are: - XC61CC1502MR-G-ND - XC61CC1502MR-G-C - XC61CC1502MR-G-F

These models may have slight variations in specifications or package options, but they serve the same purpose of voltage detection and power management.

In conclusion, XC61CC1502MR-G is an electronic component widely used for voltage detection and power management applications. Its small package size, low quiescent current, and high accuracy make it suitable for various electronic circuit designs. However, its limited output voltage options may restrict its use in certain scenarios.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC61CC1502MR-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC61CC1502MR-G in technical solutions:

  1. Question: What is XC61CC1502MR-G?
    Answer: XC61CC1502MR-G is a specific model of voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used for detecting the presence or absence of an input voltage.

  2. Question: What is the operating voltage range of XC61CC1502MR-G?
    Answer: The operating voltage range of XC61CC1502MR-G is from 0.8V to 6.0V.

  3. Question: What is the output configuration of XC61CC1502MR-G?
    Answer: XC61CC1502MR-G has an open-drain output configuration, which means it can sink current but cannot source current.

  4. Question: What is the typical quiescent current consumption of XC61CC1502MR-G?
    Answer: The typical quiescent current consumption of XC61CC1502MR-G is 1.0µA.

  5. Question: Can XC61CC1502MR-G be used for both high and low voltage applications?
    Answer: Yes, XC61CC1502MR-G can be used for both high and low voltage applications as long as they fall within its specified operating voltage range.

  6. Question: How does XC61CC1502MR-G detect the presence or absence of an input voltage?
    Answer: XC61CC1502MR-G uses a built-in voltage reference and comparator to monitor the input voltage. When the input voltage exceeds the threshold voltage, the output goes low (logic "0"). Otherwise, the output remains high (logic "1").

  7. Question: What is the hysteresis voltage of XC61CC1502MR-G?
    Answer: The hysteresis voltage of XC61CC1502MR-G is typically 0.1V, which helps to provide a stable output even in the presence of noise or fluctuations in the input voltage.

  8. Question: Can XC61CC1502MR-G be used in battery-powered applications?
    Answer: Yes, XC61CC1502MR-G can be used in battery-powered applications due to its low quiescent current consumption, which helps to conserve battery life.

  9. Question: What is the package type of XC61CC1502MR-G?
    Answer: XC61CC1502MR-G is available in a SOT-23-3 package, which is a small surface-mount package with three pins.

  10. Question: Are there any application notes or reference designs available for XC61CC1502MR-G?
    Answer: Yes, Torex Semiconductor provides application notes and reference designs for XC61CC1502MR-G on their official website, which can help users understand its usage in various technical solutions.

Please note that the answers provided here are general and may vary depending on the specific requirements and use cases. It is always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate and detailed information.