Torex Semiconductor Ltd
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6124D642MR-G
Lihat Detail Lembar Data

XC6124D642MR-G

Product Overview

Category

XC6124D642MR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • Low power consumption
  • High precision
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6124D642MR-G is available in a small surface-mount package.

Essence

The essence of XC6124D642MR-G lies in its ability to regulate voltage efficiently and reliably.

Packaging/Quantity

The product is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.8V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124D642MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Voltage regulation: XC6124D642MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: The device automatically shuts down when the output current exceeds the specified limit.
  • Thermal shutdown protection: In case of excessive temperature, the regulator enters a thermal shutdown mode to prevent damage.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • Low power consumption helps conserve energy.
  • Wide input voltage range provides flexibility in various applications.
  • Overcurrent and thermal shutdown protection enhance the reliability of the circuit.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight decrease in efficiency.

Working Principles

XC6124D642MR-G operates based on a feedback control mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. The device continuously monitors the input and output conditions to ensure proper regulation.

Detailed Application Field Plans

XC6124D642MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124D642MR-G are: - LM1117-1.8V - MCP1700-1802E/TO - TPS78218DRVT

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 399 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6124D642MR-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6124D642MR-G in technical solutions:

  1. Question: What is XC6124D642MR-G?
    - Answer: XC6124D642MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6124D642MR-G?
    - Answer: The operating voltage range of XC6124D642MR-G is typically between 0.9V and 6.0V.

  3. Question: How does XC6124D642MR-G help in technical solutions?
    - Answer: XC6124D642MR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level. This ensures proper system initialization and prevents data corruption.

  4. Question: What is the output type of XC6124D642MR-G?
    - Answer: XC6124D642MR-G has an open-drain output type, which means it can be connected to other devices with different voltage levels.

  5. Question: What is the typical reset threshold voltage of XC6124D642MR-G?
    - Answer: The typical reset threshold voltage of XC6124D642MR-G is 4.2V.

  6. Question: Can XC6124D642MR-G be used in battery-powered applications?
    - Answer: Yes, XC6124D642MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  7. Question: Does XC6124D642MR-G have any built-in delay time?
    - Answer: Yes, XC6124D642MR-G has a built-in delay time of typically 200ms to ensure stable power supply before releasing the reset signal.

  8. Question: Can XC6124D642MR-G be used in automotive applications?
    - Answer: Yes, XC6124D642MR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  9. Question: What is the package type of XC6124D642MR-G?
    - Answer: XC6124D642MR-G is available in a small SOT-25 package, which is compact and easy to integrate into various designs.

  10. Question: Is XC6124D642MR-G RoHS compliant?
    - Answer: Yes, XC6124D642MR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.