Torex Semiconductor Ltd
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6124D533MR-G
Lihat Detail Lembar Data

XC6124D533MR-G

Product Overview

Category

XC6124D533MR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.

Characteristics

  • Voltage regulation: XC6124D533MR-G provides a stable output voltage.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the output voltage.
  • Low quiescent current: It consumes minimal power when in standby mode.
  • Overcurrent protection: It safeguards the circuit by limiting the current flow.
  • Thermal shutdown protection: It prevents overheating by shutting down the device at high temperatures.

Package

XC6124D533MR-G is available in a small surface-mount package.

Essence

The essence of XC6124D533MR-G lies in its ability to regulate and maintain a stable voltage supply, ensuring proper functioning of electronic devices.

Packaging/Quantity

XC6124D533MR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input voltage range: 2.5V - 6.0V
  • Output voltage: 3.3V
  • Maximum output current: 150mA
  • Dropout voltage: 200mV (at 100mA)
  • Quiescent current: 30µA (typical)
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

XC6124D533MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • Voltage regulation: XC6124D533MR-G maintains a constant output voltage regardless of variations in the input voltage.
  • Low dropout voltage: It can operate efficiently even when the input voltage is close to the output voltage, minimizing power loss.
  • Overcurrent protection: The device limits the current flow to protect the circuit from damage.
  • Thermal shutdown protection: It shuts down automatically at high temperatures to prevent overheating.

Advantages and Disadvantages

Advantages

  • Stable output voltage ensures reliable operation of electronic components.
  • Low dropout voltage minimizes power dissipation.
  • Overcurrent protection safeguards the circuit from damage.
  • Thermal shutdown protection prevents overheating.

Disadvantages

  • Limited maximum output current (150mA).
  • Requires an external enable pin for control (optional).

Working Principles

XC6124D533MR-G utilizes a combination of internal circuitry and feedback mechanisms to regulate the output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a stable output.

Detailed Application Field Plans

XC6124D533MR-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Embedded systems

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6124D533MR-G include: - LM1117-3.3 - MCP1700-3302E/TO - AP2112K-3.3TRG1 - TS2937CP-3.3

These alternatives can be considered based on specific requirements and availability.

Word count: 440 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6124D533MR-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6124D533MR-G in technical solutions:

  1. Question: What is XC6124D533MR-G?
    - Answer: XC6124D533MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6124D533MR-G?
    - Answer: The operating voltage range of XC6124D533MR-G is from 0.8V to 6.0V.

  3. Question: How does XC6124D533MR-G work?
    - Answer: XC6124D533MR-G continuously monitors the input voltage and provides a reset signal when the voltage falls below a certain threshold. This can be used to trigger system resets or other actions.

  4. Question: What is the output type of XC6124D533MR-G?
    - Answer: XC6124D533MR-G has an open-drain output, which means it can be connected to other devices or circuits for further processing.

  5. Question: What is the typical quiescent current consumption of XC6124D533MR-G?
    - Answer: The typical quiescent current consumption of XC6124D533MR-G is very low, usually around 1.0µA.

  6. Question: Can XC6124D533MR-G be used in battery-powered applications?
    - Answer: Yes, XC6124D533MR-G's low quiescent current makes it suitable for battery-powered applications where power efficiency is crucial.

  7. Question: What is the accuracy of the voltage detection threshold in XC6124D533MR-G?
    - Answer: The accuracy of the voltage detection threshold in XC6124D533MR-G is typically ±1.5%.

  8. Question: Can XC6124D533MR-G be used for overvoltage protection?
    - Answer: No, XC6124D533MR-G is primarily designed for undervoltage detection and does not provide overvoltage protection.

  9. Question: What is the temperature range in which XC6124D533MR-G operates?
    - Answer: XC6124D533MR-G has an operating temperature range of -40°C to +85°C.

  10. Question: Is XC6124D533MR-G available in different package options?
    - Answer: Yes, XC6124D533MR-G is available in a variety of package options, including SOT-25 and USP-4B.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.