Torex Semiconductor Ltd
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6124D443ER-G
Lihat Detail Lembar Data

XC6124D443ER-G

Product Overview

Category

XC6124D443ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Package: The XC6124D443ER-G comes in a small SOT-23-5 package.
  • Essence: This voltage regulator is designed to provide stable and regulated output voltage.
  • Packaging/Quantity: It is typically sold in reels or tubes, with a quantity of 3000 units per reel.

Specifications

The specifications of XC6124D443ER-G are as follows:

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 4.43V
  • Output Current: 150mA (maximum)
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)

Detailed Pin Configuration

The XC6124D443ER-G has five pins arranged as follows:

```

| | --| |-- |____| ```

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. NC: No connection pin
  5. VOUT: Output voltage pin

Functional Features

  • Low dropout voltage: The XC6124D443ER-G exhibits a low dropout voltage, ensuring efficient regulation even when the input voltage is close to the desired output voltage.
  • Low quiescent current: With a low quiescent current, this voltage regulator minimizes power consumption when the load is light.
  • Thermal shutdown protection: The device incorporates thermal shutdown protection, preventing damage due to excessive temperature.

Advantages and Disadvantages

Advantages: - Small package size allows for space-saving designs. - Wide input voltage range provides flexibility in various applications. - Low dropout voltage ensures efficient regulation.

Disadvantages: - Limited output current may not be suitable for high-power applications. - Lack of adjustable output voltage limits customization options.

Working Principles

The XC6124D443ER-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It compares the feedback voltage with a reference voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

The XC6124D443ER-G can be used in various applications, including but not limited to: 1. Battery-powered devices 2. Portable electronic devices 3. IoT (Internet of Things) devices 4. Wearable technology 5. Automotive electronics

Detailed and Complete Alternative Models

Some alternative models to XC6124D443ER-G are: 1. XC6206P332MR-G: 3.3V voltage regulator with similar characteristics 2. XC6209B332MR-G: 3.3V voltage regulator with higher output current capability 3. XC6210B332MR-G: 3.3V voltage regulator with adjustable output voltage

These alternative models provide options based on specific requirements and design considerations.

Word count: 314 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6124D443ER-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6124D443ER-G in technical solutions:

  1. Question: What is XC6124D443ER-G?
    - Answer: XC6124D443ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.

  2. Question: What is the operating voltage range of XC6124D443ER-G?
    - Answer: The operating voltage range of XC6124D443ER-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6124D443ER-G detect the voltage level?
    - Answer: XC6124D443ER-G uses an internal voltage reference and a comparator to compare the input voltage with a preset threshold. When the input voltage drops below the threshold, it triggers the output signal.

  4. Question: What is the output signal of XC6124D443ER-G?
    - Answer: The output signal of XC6124D443ER-G is an open-drain output that can be connected to other devices for further processing or control.

  5. Question: Can XC6124D443ER-G be used in battery-powered applications?
    - Answer: Yes, XC6124D443ER-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Question: Is XC6124D443ER-G suitable for automotive applications?
    - Answer: Yes, XC6124D443ER-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  7. Question: What is the accuracy of the voltage detection in XC6124D443ER-G?
    - Answer: The accuracy of voltage detection in XC6124D443ER-G is typically ±1.5%.

  8. Question: Can XC6124D443ER-G be used in overvoltage protection circuits?
    - Answer: No, XC6124D443ER-G is specifically designed for undervoltage detection and does not provide overvoltage protection.

  9. Question: What is the temperature range of operation for XC6124D443ER-G?
    - Answer: XC6124D443ER-G has an operating temperature range of -40°C to +85°C.

  10. Question: Is XC6124D443ER-G available in different package options?
    - Answer: Yes, XC6124D443ER-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.