Lihat spesifikasi untuk detail produk.
XC6124A750ER-G
Product Overview
Category
XC6124A750ER-G belongs to the category of voltage regulators.
Use
It is primarily used for regulating voltage in electronic circuits.
Characteristics
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage: 0.8V to 5.5V
- Maximum Output Current: 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Package
XC6124A750ER-G comes in a small SOT-23-5 package.
Essence
The essence of XC6124A750ER-G is its ability to provide stable and regulated voltage output in various electronic applications.
Packaging/Quantity
It is typically available in reels containing 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage Range: 0.8V to 5.5V
- Output Current: 150mA (maximum)
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
- Package Type: SOT-23-5
Detailed Pin Configuration
XC6124A750ER-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- EN: Enable pin
- NC: No connection
- VOUT: Output voltage pin
Functional Features
- Low dropout voltage for efficient regulation.
- Low quiescent current for power-saving operation.
- Wide input voltage range for versatility.
- Stable and regulated output voltage.
- Enable pin for easy control of the regulator.
Advantages
- Compact SOT-23-5 package for space-constrained applications.
- Wide input voltage range allows compatibility with various power sources.
- Low dropout voltage ensures efficient power conversion.
- Low quiescent current minimizes power consumption.
- Enable pin provides flexibility in controlling the regulator.
Disadvantages
- Maximum output current limited to 150mA, may not be suitable for high-power applications.
- Limited output voltage range may restrict certain voltage requirements.
Working Principles
XC6124A750ER-G operates based on a voltage regulation principle. It takes an input voltage within the specified range and regulates it to provide a stable output voltage. The internal circuitry of the regulator ensures that the output voltage remains constant even when the input voltage or load conditions vary.
Detailed Application Field Plans
XC6124A750ER-G finds applications in various electronic devices and systems, including but not limited to:
- Battery-powered portable devices
- IoT (Internet of Things) devices
- Wearable electronics
- Consumer electronics
- Industrial automation systems
- Automotive electronics
- Medical devices
Detailed and Complete Alternative Models
Some alternative models to XC6124A750ER-G include:
- XC6204B332MR-G: Similar voltage regulator with a different package type (SOT-25).
- XC6220B332MR-G: Voltage regulator with higher maximum output current (300mA).
- XC6219B332MR-G: Voltage regulator with a wider input voltage range (1.8V to 6.0V).
These alternative models offer similar functionality and can be considered as substitutes depending on specific application requirements.
Word count: 511 words
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6124A750ER-G dalam solusi teknis
Sure! Here are 10 common questions and answers related to the application of XC6124A750ER-G in technical solutions:
Question: What is XC6124A750ER-G?
- Answer: XC6124A750ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.Question: What is the operating voltage range of XC6124A750ER-G?
- Answer: The operating voltage range of XC6124A750ER-G is from 0.7V to 6.0V.Question: How does XC6124A750ER-G detect the voltage level?
- Answer: XC6124A750ER-G uses a built-in voltage reference and comparator to compare the input voltage with a preset threshold. When the input voltage drops below the threshold, it triggers the output signal.Question: What is the output type of XC6124A750ER-G?
- Answer: XC6124A750ER-G has an open-drain output type, which means it can sink current but cannot source current. It requires an external pull-up resistor to provide a logic high level.Question: What is the typical quiescent current consumption of XC6124A750ER-G?
- Answer: The typical quiescent current consumption of XC6124A750ER-G is around 1.0µA, making it suitable for low-power applications.Question: Can XC6124A750ER-G be used in battery-powered devices?
- Answer: Yes, XC6124A750ER-G is well-suited for battery-powered devices due to its low quiescent current consumption, which helps to conserve battery life.Question: What is the hysteresis voltage of XC6124A750ER-G?
- Answer: The hysteresis voltage of XC6124A750ER-G is typically 0.1V. This ensures a stable output even in the presence of noise or voltage fluctuations near the threshold.Question: Can XC6124A750ER-G be used for overvoltage detection?
- Answer: No, XC6124A750ER-G is specifically designed for undervoltage detection. It triggers an output signal when the voltage falls below the threshold, not when it exceeds a certain level.Question: What is the package type of XC6124A750ER-G?
- Answer: XC6124A750ER-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.Question: Are there any application notes or reference designs available for XC6124A750ER-G?
- Answer: Yes, Torex Semiconductor provides application notes and reference designs for XC6124A750ER-G on their website. These resources can help users understand how to integrate the IC into their specific technical solutions.
Please note that the answers provided here are general and may vary depending on the specific requirements and use cases. It is always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate and detailed information.