Torex Semiconductor Ltd
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6124A647ER-G
Lihat Detail Lembar Data

XC6124A647ER-G

Product Overview

Category

XC6124A647ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6124A647ER-G comes in a small surface-mount package.

Essence

The essence of XC6124A647ER-G lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

The product is typically packaged in reels and each reel contains a specific quantity of XC6124A647ER-G units.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124A647ER-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • Voltage regulation: XC6124A647ER-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: The device automatically shuts down if the output current exceeds the maximum specified value.
  • Thermal shutdown protection: In case of excessive temperature, the regulator enters a thermal shutdown mode to prevent damage.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • High efficiency results in minimal power loss.
  • Wide input voltage range enables compatibility with various power sources.
  • Overcurrent and thermal shutdown protection enhance the safety and reliability of the circuit.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight decrease in efficiency.

Working Principles

XC6124A647ER-G operates based on the principle of feedback control. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for any variations in the input voltage.

Detailed Application Field Plans

XC6124A647ER-G finds applications in various electronic devices and systems, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable technology - Industrial automation

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124A647ER-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar functionality and specifications, providing options for different design requirements.

Word count: 346 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6124A647ER-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6124A647ER-G in technical solutions:

  1. Question: What is XC6124A647ER-G?
    Answer: XC6124A647ER-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6124A647ER-G?
    Answer: The operating voltage range of XC6124A647ER-G is typically between 0.9V and 6.0V.

  3. Question: How does XC6124A647ER-G help in technical solutions?
    Answer: XC6124A647ER-G helps in technical solutions by ensuring proper system initialization and preventing data corruption or malfunctioning due to unstable power supply voltages.

  4. Question: Can XC6124A647ER-G be used in battery-powered applications?
    Answer: Yes, XC6124A647ER-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  5. Question: What is the output type of XC6124A647ER-G?
    Answer: XC6124A647ER-G has an open-drain output type, which allows for flexibility in connecting external components.

  6. Question: What is the typical reset threshold voltage of XC6124A647ER-G?
    Answer: The typical reset threshold voltage of XC6124A647ER-G is 4.7V.

  7. Question: Can XC6124A647ER-G be used in automotive applications?
    Answer: Yes, XC6124A647ER-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  8. Question: Does XC6124A647ER-G have built-in hysteresis?
    Answer: Yes, XC6124A647ER-G has built-in hysteresis of typically 100mV, which helps to prevent oscillation near the threshold voltage.

  9. Question: What is the package type of XC6124A647ER-G?
    Answer: XC6124A647ER-G is available in a SOT-25 package, which is compact and suitable for space-constrained designs.

  10. Question: Can XC6124A647ER-G be used in industrial control systems?
    Answer: Yes, XC6124A647ER-G can be used in industrial control systems as it operates reliably in a wide temperature range of -40°C to +85°C.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.