Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6124A249MG-G

XC6124A249MG-G

Product Overview

Category

XC6124A249MG-G belongs to the category of voltage regulators.

Use

It is commonly used to regulate and stabilize voltage in electronic circuits.

Characteristics

  • Voltage regulation
  • Stabilization of output voltage
  • Compact size
  • Low power consumption

Package

XC6124A249MG-G is available in a small surface-mount package.

Essence

The essence of XC6124A249MG-G lies in its ability to provide stable voltage output for various electronic devices.

Packaging/Quantity

The product is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.49V
  • Output Current: 150mA (max)
  • Dropout Voltage: 200mV (typ)
  • Quiescent Current: 30µA (typ)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124A249MG-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: The XC6124A249MG-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to prevent damage to the device and connected components.
  • Low dropout voltage: The low dropout voltage allows the regulator to operate efficiently even when the input voltage is close to the desired output voltage.

Advantages and Disadvantages

Advantages

  • Compact size: The small form factor makes it suitable for space-constrained applications.
  • Low power consumption: The low quiescent current minimizes power consumption, making it ideal for battery-powered devices.
  • Overcurrent protection: The built-in overcurrent protection enhances the reliability of the device and protects connected components.

Disadvantages

  • Limited output current: The maximum output current of 150mA may not be sufficient for high-power applications.
  • Narrow input voltage range: The XC6124A249MG-G has a limited input voltage range of 2.5V to 6.0V, which may restrict its use in certain applications.

Working Principles

XC6124A249MG-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. This feedback loop ensures that the output voltage remains constant even when the input voltage or load conditions change.

Detailed Application Field Plans

XC6124A249MG-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124A249MG-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 411 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6124A249MG-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6124A249MG-G in technical solutions:

  1. Question: What is XC6124A249MG-G?
    - Answer: XC6124A249MG-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level in electronic circuits.

  2. Question: What is the operating voltage range of XC6124A249MG-G?
    - Answer: The operating voltage range of XC6124A249MG-G is from 0.8V to 6.0V.

  3. Question: What is the output type of XC6124A249MG-G?
    - Answer: XC6124A249MG-G has an open-drain output type.

  4. Question: What is the typical quiescent current consumption of XC6124A249MG-G?
    - Answer: The typical quiescent current consumption of XC6124A249MG-G is 1.0µA.

  5. Question: Can XC6124A249MG-G be used for overvoltage detection?
    - Answer: No, XC6124A249MG-G is specifically designed for undervoltage detection only.

  6. Question: What is the hysteresis voltage of XC6124A249MG-G?
    - Answer: The hysteresis voltage of XC6124A249MG-G is typically 50mV.

  7. Question: What is the maximum supply voltage that XC6124A249MG-G can handle?
    - Answer: XC6124A249MG-G can handle a maximum supply voltage of 6.5V.

  8. Question: Does XC6124A249MG-G have built-in delay time?
    - Answer: Yes, XC6124A249MG-G has a built-in delay time of approximately 200ms.

  9. Question: Can XC6124A249MG-G be used in battery-powered applications?
    - Answer: Yes, XC6124A249MG-G is suitable for battery-powered applications due to its low quiescent current consumption.

  10. Question: What is the package type of XC6124A249MG-G?
    - Answer: XC6124A249MG-G is available in a SOT-25 package.

Please note that these answers are based on general information and it's always recommended to refer to the datasheet or consult with the manufacturer for specific details and application requirements.