Torex Semiconductor Ltd
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6124A249ER-G
Lihat Detail Lembar Data

XC6124A249ER-G

Product Overview

Category

XC6124A249ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection

Package

XC6124A249ER-G is available in a small surface-mount package.

Essence

The essence of XC6124A249ER-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

It is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.49V
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 25µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124A249ER-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • High accuracy voltage regulation ensures stable output.
  • Low dropout voltage enables efficient power conversion.
  • Low quiescent current minimizes power consumption.
  • Thermal shutdown protection prevents overheating.

Advantages and Disadvantages

Advantages

  • High precision voltage regulation
  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection

Disadvantages

  • Limited input voltage range (2.5V - 6.0V)
  • Not suitable for high-power applications

Working Principles

XC6124A249ER-G operates based on a feedback mechanism that compares the output voltage with a reference voltage. It adjusts the internal circuitry to maintain a stable output voltage, compensating for changes in input voltage and load conditions.

Detailed Application Field Plans

XC6124A249ER-G finds applications in various electronic devices and systems, including: - Battery-powered devices - Portable consumer electronics - IoT devices - Industrial control systems - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124A249ER-G are: - XC6124B249ER-G: Similar specifications with minor variations. - XC6124C249ER-G: Higher input voltage range and additional features. - XC6124D249ER-G: Lower dropout voltage and improved efficiency.

These alternative models provide flexibility in choosing the most suitable voltage regulator based on specific requirements.

Word count: 305 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6124A249ER-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6124A249ER-G in technical solutions:

  1. Question: What is XC6124A249ER-G?
    - Answer: XC6124A249ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6124A249ER-G?
    - Answer: The operating voltage range of XC6124A249ER-G is from 0.9V to 6.0V.

  3. Question: What is the output type of XC6124A249ER-G?
    - Answer: XC6124A249ER-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor.

  4. Question: What is the typical quiescent current consumption of XC6124A249ER-G?
    - Answer: The typical quiescent current consumption of XC6124A249ER-G is around 1.0µA.

  5. Question: Can XC6124A249ER-G be used for overvoltage detection?
    - Answer: No, XC6124A249ER-G is specifically designed for undervoltage detection. It triggers an output signal when the monitored voltage falls below a certain threshold.

  6. Question: What is the accuracy of the undervoltage detection threshold in XC6124A249ER-G?
    - Answer: The accuracy of the undervoltage detection threshold in XC6124A249ER-G is typically ±2%.

  7. Question: Is XC6124A249ER-G suitable for battery-powered applications?
    - Answer: Yes, XC6124A249ER-G is suitable for battery-powered applications due to its low quiescent current consumption.

  8. Question: Can XC6124A249ER-G be used in automotive electronics?
    - Answer: Yes, XC6124A249ER-G is AEC-Q100 qualified and can be used in automotive electronics applications.

  9. Question: What is the temperature range of operation for XC6124A249ER-G?
    - Answer: XC6124A249ER-G has an operating temperature range of -40°C to +85°C.

  10. Question: Does XC6124A249ER-G have any built-in delay function?
    - Answer: No, XC6124A249ER-G does not have a built-in delay function. The output signal is triggered immediately when the undervoltage threshold is reached.

Please note that these answers are based on general information about XC6124A249ER-G and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed technical specifications and guidelines.