Lihat spesifikasi untuk detail produk.
XC6123F742MR-G
Product Overview
Category
XC6123F742MR-G belongs to the category of integrated circuits (ICs).
Use
This product is commonly used in electronic devices for voltage regulation and power management.
Characteristics
- Voltage regulation capabilities
- Power management features
- Compact size
- High efficiency
- Low power consumption
Package
XC6123F742MR-G is available in a small form factor package, which makes it suitable for space-constrained applications.
Essence
The essence of XC6123F742MR-G lies in its ability to regulate voltage and manage power efficiently, ensuring stable and reliable operation of electronic devices.
Packaging/Quantity
This product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage Range: 1.2V - 5.5V
- Maximum Output Current: 200mA
- Dropout Voltage: 150mV @ 100mA
- Quiescent Current: 30μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6123F742MR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- EN: Enable pin
- VOUT: Output voltage pin
Functional Features
- Voltage regulation: XC6123F742MR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: The IC incorporates overcurrent protection to safeguard connected devices.
- Thermal shutdown: In case of excessive temperature, the IC shuts down to prevent damage.
- Low quiescent current: The device consumes minimal current when not actively regulating voltage.
Advantages and Disadvantages
Advantages
- Compact size allows for easy integration into small electronic devices.
- High efficiency results in minimal power loss during voltage regulation.
- Wide input and output voltage ranges provide flexibility in various applications.
Disadvantages
- Limited maximum output current may not be suitable for high-power applications.
- Dropout voltage of 150mV may affect performance in low-voltage scenarios.
Working Principles
XC6123F742MR-G utilizes a combination of internal circuitry and feedback mechanisms to regulate the output voltage. It continuously monitors the input voltage and adjusts its internal components to maintain a stable output voltage within the specified range.
Detailed Application Field Plans
XC6123F742MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Wearable devices - IoT devices - Battery-powered devices
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to XC6123F742MR-G are: - XC6123F742ML-G - XC6123F742NR-G - XC6123F742NL-G - XC6123F742PR-G
These models have slight variations in specifications and pin configurations, allowing users to choose the most suitable option for their specific requirements.
Word count: 405 words
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6123F742MR-G dalam solusi teknis
Sure! Here are 10 common questions and answers related to the application of XC6123F742MR-G in technical solutions:
Q: What is XC6123F742MR-G? A: XC6123F742MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Q: What is the operating voltage range of XC6123F742MR-G? A: The operating voltage range of XC6123F742MR-G is typically between 0.8V and 6.0V.
Q: How does XC6123F742MR-G work? A: XC6123F742MR-G works by continuously monitoring the input voltage and comparing it with a preset threshold voltage. When the input voltage falls below or exceeds this threshold, the output of the IC changes state, triggering an alert or control signal.
Q: What is the output type of XC6123F742MR-G? A: XC6123F742MR-G has an open-drain output type, which means it can sink current but cannot source current. It requires an external pull-up resistor to provide the desired output voltage level.
Q: What is the typical quiescent current consumption of XC6123F742MR-G? A: The typical quiescent current consumption of XC6123F742MR-G is very low, usually around 1.0µA, making it suitable for battery-powered applications.
Q: Can XC6123F742MR-G be used for overvoltage protection? A: No, XC6123F742MR-G is primarily designed for undervoltage detection. It does not provide overvoltage protection functionality.
Q: What is the typical accuracy of XC6123F742MR-G? A: The typical accuracy of XC6123F742MR-G is ±1.5% of the detection voltage.
Q: Can XC6123F742MR-G be used in automotive applications? A: Yes, XC6123F742MR-G is AEC-Q100 qualified and suitable for automotive applications, including vehicle electronics and control systems.
Q: Does XC6123F742MR-G have built-in hysteresis? A: Yes, XC6123F742MR-G has a built-in hysteresis feature that helps prevent output oscillation near the threshold voltage, ensuring stable operation.
Q: What are some common applications of XC6123F742MR-G? A: XC6123F742MR-G is commonly used in various technical solutions such as battery-powered devices, portable electronics, industrial equipment, home appliances, automotive systems, and more, where undervoltage monitoring is critical for proper operation.
Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.