Torex Semiconductor Ltd
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6123F642MR-G
Lihat Detail Lembar Data

XC6123F642MR-G

Product Overview

Category

XC6123F642MR-G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • High efficiency
  • Low power consumption

Package

XC6123F642MR-G is available in a small form factor package, which makes it suitable for space-constrained applications.

Essence

The essence of XC6123F642MR-G lies in its ability to regulate voltage and manage power efficiently, ensuring stable operation of electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6123F642MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6123F642MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Power management: This IC efficiently manages power consumption, optimizing battery life in portable devices.
  • Overcurrent protection: It incorporates overcurrent protection circuitry to safeguard connected devices from excessive current flow.
  • Thermal shutdown: In case of overheating, the IC automatically shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into small electronic devices.
  • High efficiency results in minimal power loss during voltage regulation.
  • Low quiescent current ensures energy-efficient operation.
  • Overcurrent protection enhances the safety of connected devices.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Dropout voltage of 200mV may affect performance in low-voltage scenarios.

Working Principles

XC6123F642MR-G utilizes a combination of internal circuitry, feedback mechanisms, and control logic to regulate input voltage and provide a stable output voltage. It employs various techniques such as pulse width modulation (PWM) to achieve efficient power management.

Detailed Application Field Plans

XC6123F642MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6123F642MR-G are: - XC6123F642ML-G - XC6123F642NR-G - XC6123F642PR-G - XC6123F642SR-G

These models have comparable specifications and can be considered as alternatives based on specific application requirements.

Word count: 356 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6123F642MR-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6123F642MR-G in technical solutions:

  1. Question: What is XC6123F642MR-G?
    - Answer: XC6123F642MR-G is a specific model of voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.

  2. Question: What is the operating voltage range of XC6123F642MR-G?
    - Answer: The operating voltage range of XC6123F642MR-G is typically between 0.7V and 6.0V.

  3. Question: How does XC6123F642MR-G work?
    - Answer: XC6123F642MR-G works by comparing the input voltage with a reference voltage internally set within the IC. When the input voltage drops below the reference voltage, it triggers an output signal indicating a low voltage condition.

  4. Question: What is the output type of XC6123F642MR-G?
    - Answer: XC6123F642MR-G has an open-drain output type, which means it can be connected to other devices or circuits for further processing.

  5. Question: What is the typical quiescent current consumption of XC6123F642MR-G?
    - Answer: The typical quiescent current consumption of XC6123F642MR-G is very low, usually around 1.0µA.

  6. Question: Can XC6123F642MR-G be used in battery-powered applications?
    - Answer: Yes, XC6123F642MR-G is suitable for battery-powered applications due to its low quiescent current consumption, which helps to conserve battery life.

  7. Question: What is the accuracy of the voltage detection threshold in XC6123F642MR-G?
    - Answer: The accuracy of the voltage detection threshold in XC6123F642MR-G is typically ±1.5%.

  8. Question: Can XC6123F642MR-G be used for overvoltage protection?
    - Answer: No, XC6123F642MR-G is specifically designed for undervoltage detection and does not provide overvoltage protection.

  9. Question: Is XC6123F642MR-G suitable for automotive applications?
    - Answer: Yes, XC6123F642MR-G is suitable for automotive applications as it meets the necessary requirements such as AEC-Q100 Grade 2 qualification.

  10. Question: What is the package type of XC6123F642MR-G?
    - Answer: XC6123F642MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.