Torex Semiconductor Ltd
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6123F542MR-G
Lihat Detail Lembar Data

XC6123F542MR-G

Product Overview

Category

XC6123F542MR-G belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Small form factor
  • High efficiency
  • Low power consumption

Package

XC6123F542MR-G is available in a compact surface mount package.

Essence

The essence of this product lies in its ability to regulate voltage and manage power efficiently in electronic devices.

Packaging/Quantity

XC6123F542MR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Maximum Output Current: 150mA
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XC6123F542MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: The XC6123F542MR-G provides stable output voltage regardless of input voltage fluctuations.
  • Power management: It efficiently manages power consumption, reducing energy waste.
  • Enable pin: The EN pin allows for easy control of the device's operation.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption.
  • Compact size enables integration into small electronic devices.
  • Wide input and output voltage ranges provide flexibility in various applications.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Temperature range limitations restrict usage in extreme environments.

Working Principles

The XC6123F542MR-G utilizes a feedback control mechanism to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a stable output.

Detailed Application Field Plans

XC6123F542MR-G finds application in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6123F542MR-G are: - XC6123F542ML-G - XC6123F542NR-G - XC6123F542PR-G

These models have comparable specifications and pin configurations, providing alternatives for different design requirements.

Word count: 314 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6123F542MR-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6123F542MR-G in technical solutions:

  1. Question: What is XC6123F542MR-G?
    - Answer: XC6123F542MR-G is a specific model of voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.

  2. Question: What is the operating voltage range of XC6123F542MR-G?
    - Answer: The operating voltage range of XC6123F542MR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6123F542MR-G work?
    - Answer: XC6123F542MR-G works by comparing the input voltage with a reference voltage internally set within the IC. When the input voltage drops below the reference voltage, it triggers the output signal.

  4. Question: What is the output type of XC6123F542MR-G?
    - Answer: XC6123F542MR-G has an open-drain output type, which means it can sink current but cannot source current. An external pull-up resistor is required to pull the output signal high.

  5. Question: What is the typical quiescent current consumption of XC6123F542MR-G?
    - Answer: The typical quiescent current consumption of XC6123F542MR-G is very low, usually around 1.0µA.

  6. Question: Can XC6123F542MR-G be used for overvoltage detection?
    - Answer: No, XC6123F542MR-G is specifically designed for undervoltage detection. It triggers the output signal when the voltage falls below the threshold, not when it exceeds a certain level.

  7. Question: What is the typical hysteresis voltage of XC6123F542MR-G?
    - Answer: The typical hysteresis voltage of XC6123F542MR-G is around 0.1V. This means that once the output signal is triggered, the input voltage must rise above the threshold plus the hysteresis voltage to reset the output.

  8. Question: Can XC6123F542MR-G be used in battery-powered applications?
    - Answer: Yes, XC6123F542MR-G is suitable for battery-powered applications due to its low quiescent current consumption and wide operating voltage range.

  9. Question: Is XC6123F542MR-G available in different package options?
    - Answer: Yes, XC6123F542MR-G is available in various package options, including SOT-25, SOT-89, and USP-6B.

  10. Question: What are some typical applications of XC6123F542MR-G?
    - Answer: XC6123F542MR-G can be used in a wide range of applications, such as battery-powered devices, portable electronics, automotive systems, power management circuits, and more, where undervoltage detection is required.

Please note that the answers provided here are general and may vary depending on the specific requirements and datasheet of XC6123F542MR-G.