Torex Semiconductor Ltd
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6123E650MR-G
Lihat Detail Lembar Data

XC6123E650MR-G

Product Overview

Category

XC6123E650MR-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize the voltage in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short circuit protection

Package

XC6123E650MR-G is available in a small surface mount package.

Essence

The essence of XC6123E650MR-G is to provide a stable and regulated voltage output for electronic devices.

Packaging/Quantity

XC6123E650MR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6123E650MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • High precision voltage regulation ensures a stable output voltage.
  • Low dropout voltage allows for efficient power conversion.
  • Low quiescent current minimizes power consumption when the device is idle.
  • Thermal shutdown protection prevents overheating and damage to the regulator.
  • Short circuit protection safeguards against excessive current flow.

Advantages and Disadvantages

Advantages

  • High precision voltage regulation ensures reliable performance.
  • Low dropout voltage enables efficient power conversion.
  • Thermal shutdown and short circuit protection enhance safety and durability.

Disadvantages

  • Limited output current capacity (150mA).
  • Narrow input voltage range (2.5V - 6.0V).

Working Principles

XC6123E650MR-G operates by comparing the output voltage with a reference voltage and adjusting the internal circuitry to maintain a stable output voltage. It utilizes a feedback mechanism to continuously monitor and regulate the output voltage.

Detailed Application Field Plans

XC6123E650MR-G is commonly used in various electronic devices, including:

  1. Mobile phones
  2. Portable media players
  3. Digital cameras
  4. Wireless communication modules
  5. IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6123E650MR-G are:

  1. XC6206P332MR-G
  2. LM1117IMPX-3.3/NOPB
  3. MCP1700T-3302E/TT

These models offer similar voltage regulation capabilities and can be suitable replacements depending on specific requirements.

Word count: 366 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6123E650MR-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6123E650MR-G in technical solutions:

  1. Q: What is XC6123E650MR-G? A: XC6123E650MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level in electronic circuits.

  2. Q: What is the operating voltage range of XC6123E650MR-G? A: The operating voltage range of XC6123E650MR-G is from 0.65V to 6.0V.

  3. Q: How does XC6123E650MR-G work? A: XC6123E650MR-G works by comparing the input voltage with a reference voltage. When the input voltage falls below the reference voltage, it triggers an output signal.

  4. Q: What is the output type of XC6123E650MR-G? A: XC6123E650MR-G has an open-drain output type, which means it can sink current but cannot source current.

  5. Q: What is the typical quiescent current of XC6123E650MR-G? A: The typical quiescent current of XC6123E650MR-G is very low, usually around 1.0µA.

  6. Q: Can XC6123E650MR-G be used for overvoltage protection? A: No, XC6123E650MR-G is specifically designed as an undervoltage detector and does not provide overvoltage protection.

  7. Q: What is the accuracy of the voltage detection threshold in XC6123E650MR-G? A: The accuracy of the voltage detection threshold in XC6123E650MR-G is typically ±1.5%.

  8. Q: Can XC6123E650MR-G be used in battery-powered applications? A: Yes, XC6123E650MR-G is suitable for battery-powered applications due to its low quiescent current and wide operating voltage range.

  9. Q: Does XC6123E650MR-G have built-in hysteresis? A: Yes, XC6123E650MR-G has a built-in hysteresis of typically 10% of the detection voltage, which helps prevent false triggering.

  10. Q: What is the package type of XC6123E650MR-G? A: XC6123E650MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.