Torex Semiconductor Ltd
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6123E632MR-G
Lihat Detail Lembar Data

XC6123E632MR-G

Product Overview

Category

XC6123E632MR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize the output voltage.

Characteristics

  • Voltage regulation: XC6123E632MR-G provides a stable output voltage regardless of input voltage fluctuations.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
  • Low quiescent current: The regulator consumes minimal current when there is no load.
  • Thermal shutdown protection: It automatically shuts down to prevent damage due to excessive heat.

Package

XC6123E632MR-G comes in a small surface-mount package, making it suitable for compact electronic devices.

Essence

The essence of XC6123E632MR-G lies in its ability to maintain a constant output voltage, ensuring reliable operation of electronic circuits.

Packaging/Quantity

It is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input voltage range: 2.5V - 6.0V
  • Output voltage options: 1.2V, 1.8V, 2.5V, 3.3V, 5.0V
  • Maximum output current: 150mA
  • Dropout voltage: 200mV (at 100mA)
  • Quiescent current: 30µA (typical)
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

XC6123E632MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: Maintains a stable output voltage within the specified range.
  • Short-circuit protection: Safeguards the regulator and connected components from damage in case of a short circuit.
  • Reverse polarity protection: Prevents damage due to incorrect polarity connection.
  • Low quiescent current: Ensures minimal power consumption when no load is present.

Advantages and Disadvantages

Advantages

  • Compact size and surface-mount package make it suitable for space-constrained applications.
  • Wide input voltage range allows compatibility with various power sources.
  • Low dropout voltage ensures efficient operation even with low input-output voltage differentials.
  • Thermal shutdown protection prevents overheating and subsequent damage.

Disadvantages

  • Limited maximum output current may not be sufficient for high-power applications.
  • Restricted output voltage options may limit its use in certain circuits requiring specific voltages.

Working Principles

XC6123E632MR-G utilizes a combination of internal circuitry, feedback mechanisms, and control elements to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a constant output voltage.

Detailed Application Field Plans

XC6123E632MR-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6123E632MR-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar functionality and characteristics, providing options for different design requirements.

Word count: 439 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6123E632MR-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6123E632MR-G in technical solutions:

  1. Question: What is XC6123E632MR-G?
    - Answer: XC6123E632MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6123E632MR-G?
    - Answer: The operating voltage range of XC6123E632MR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6123E632MR-G work?
    - Answer: XC6123E632MR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or exceeds a certain threshold, it triggers an output signal to indicate the status of the power supply.

  4. Question: What is the output type of XC6123E632MR-G?
    - Answer: XC6123E632MR-G has an open-drain output type, which means it can be connected to other devices through a pull-up resistor to achieve different logic levels.

  5. Question: What is the quiescent current consumption of XC6123E632MR-G?
    - Answer: The quiescent current consumption of XC6123E632MR-G is typically very low, usually around 1.0µA.

  6. Question: Can XC6123E632MR-G be used in battery-powered applications?
    - Answer: Yes, XC6123E632MR-G is suitable for battery-powered applications due to its low quiescent current consumption, which helps to conserve battery life.

  7. Question: What is the accuracy of XC6123E632MR-G?
    - Answer: The accuracy of XC6123E632MR-G is typically within ±1.5% of the detection voltage.

  8. Question: Can XC6123E632MR-G be used for overvoltage protection?
    - Answer: Yes, XC6123E632MR-G can be used for overvoltage protection by setting the detection voltage threshold to the desired level and triggering an output signal when the input voltage exceeds that threshold.

  9. Question: Is XC6123E632MR-G suitable for automotive applications?
    - Answer: Yes, XC6123E632MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  10. Question: What are some typical applications of XC6123E632MR-G?
    - Answer: Some typical applications of XC6123E632MR-G include battery-powered devices, portable electronics, industrial equipment, automotive systems, and power management circuits.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.