Lihat spesifikasi untuk detail produk.
XC6123D742MR-G
Product Overview
Category
XC6123D742MR-G belongs to the category of voltage regulators.
Use
It is used to regulate and stabilize voltage in electronic circuits.
Characteristics
- High precision voltage regulation
- Low dropout voltage
- Low quiescent current
- Thermal shutdown protection
- Short circuit protection
Package
XC6123D742MR-G is available in a small surface mount package.
Essence
The essence of XC6123D742MR-G is to provide stable and regulated voltage for electronic devices.
Packaging/Quantity
It is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage Range: 1.2V - 5.0V
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 25μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6123D742MR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- EN: Enable pin (optional)
Functional Features
- Voltage regulation: XC6123D742MR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
- Low quiescent current: The regulator consumes minimal current when no load is connected.
- Thermal shutdown protection: It shuts down automatically to prevent damage due to excessive heat.
- Short circuit protection: XC6123D742MR-G safeguards against short circuits, preventing damage to the device.
Advantages and Disadvantages
Advantages
- High precision voltage regulation ensures reliable performance of electronic devices.
- Low dropout voltage allows for efficient operation even with low input voltages.
- Low quiescent current minimizes power consumption when the device is idle.
- Thermal shutdown protection prevents overheating and potential damage.
- Short circuit protection safeguards against electrical faults.
Disadvantages
- Limited input voltage range (2.5V - 6.0V) may not be suitable for all applications.
- Output voltage range (1.2V - 5.0V) may not cover all required voltage levels.
Working Principles
XC6123D742MR-G utilizes a feedback mechanism to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a stable output. The regulator continuously monitors the input voltage, output voltage, and load conditions to ensure proper regulation.
Detailed Application Field Plans
XC6123D742MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Digital cameras - Wireless communication devices - Wearable devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6123D742MR-G are: - LM1117-ADJ - LT1763-3.3 - TPS7A4700
These models offer similar functionality and characteristics, providing options for different design requirements.
Word count: 408 words
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6123D742MR-G dalam solusi teknis
Sure! Here are 10 common questions and answers related to the application of XC6123D742MR-G in technical solutions:
Question: What is XC6123D742MR-G?
- Answer: XC6123D742MR-G is a specific model of voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.Question: What is the operating voltage range of XC6123D742MR-G?
- Answer: The operating voltage range of XC6123D742MR-G is typically between 0.8V and 6.0V.Question: How does XC6123D742MR-G work?
- Answer: XC6123D742MR-G works by comparing the input voltage with a reference voltage internally set within the IC. When the input voltage drops below the reference voltage, it triggers the output signal.Question: What is the output type of XC6123D742MR-G?
- Answer: XC6123D742MR-G has an open-drain output type, which means it can sink current but cannot source current. This allows for flexibility in connecting external components.Question: What is the typical quiescent current consumption of XC6123D742MR-G?
- Answer: The typical quiescent current consumption of XC6123D742MR-G is very low, usually around 1.0µA.Question: Can XC6123D742MR-G be used in battery-powered applications?
- Answer: Yes, XC6123D742MR-G is suitable for battery-powered applications due to its low quiescent current consumption, which helps conserve battery life.Question: What is the hysteresis voltage of XC6123D742MR-G?
- Answer: The hysteresis voltage of XC6123D742MR-G is typically 0.1V, which means the output signal will remain active until the input voltage rises above the threshold voltage plus the hysteresis voltage.Question: Can XC6123D742MR-G be used in automotive applications?
- Answer: Yes, XC6123D742MR-G is AEC-Q100 qualified and suitable for automotive applications, providing reliable voltage monitoring and protection.Question: What is the temperature range of XC6123D742MR-G?
- Answer: XC6123D742MR-G has an operating temperature range of -40°C to +85°C, making it suitable for a wide range of environments.Question: How can XC6123D742MR-G be connected in a circuit?
- Answer: XC6123D742MR-G requires an external pull-up resistor connected between the output pin and the power supply voltage. The input pin should be connected to the voltage being monitored, and the ground pin should be connected to the system ground.
Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.