Torex Semiconductor Ltd
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6123D733MR-G
Lihat Detail Lembar Data

XC6123D733MR-G

Product Overview

Category

XC6123D733MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6123D733MR-G comes in a small surface-mount package.

Essence

The essence of XC6123D733MR-G lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

It is typically packaged in reels and available in quantities of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 300mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 40μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6123D733MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6123D733MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the circuit by limiting the output current in case of excessive load.
  • Thermal shutdown protection: The device automatically shuts down if the temperature exceeds a certain threshold, preventing damage due to overheating.

Advantages and Disadvantages

Advantages

  • Small form factor allows for space-saving designs.
  • High efficiency results in minimal power loss.
  • Wide input voltage range makes it compatible with various power sources.
  • Overcurrent and thermal protection enhance circuit reliability.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6123D733MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for input voltage variations.

Detailed Application Field Plans

XC6123D733MR-G finds application in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Embedded systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6123D733MR-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

In conclusion, XC6123D733MR-G is a compact voltage regulator with excellent efficiency and protection features. Its wide range of applications and availability of alternative models make it a versatile choice for various electronic circuits.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6123D733MR-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6123D733MR-G in technical solutions:

  1. Question: What is XC6123D733MR-G?
    Answer: XC6123D733MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides an output signal when it falls below a certain threshold.

  2. Question: What is the operating voltage range of XC6123D733MR-G?
    Answer: The operating voltage range of XC6123D733MR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6123D733MR-G detect the power supply voltage?
    Answer: XC6123D733MR-G uses a built-in voltage reference and comparator to monitor the power supply voltage.

  4. Question: What is the output signal of XC6123D733MR-G?
    Answer: The output signal of XC6123D733MR-G is an open-drain output, which means it can be connected to other devices or circuits for further processing.

  5. Question: Can XC6123D733MR-G be used in battery-powered applications?
    Answer: Yes, XC6123D733MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Question: What is the typical accuracy of XC6123D733MR-G?
    Answer: The typical accuracy of XC6123D733MR-G is ±2%.

  7. Question: Can XC6123D733MR-G be used in automotive applications?
    Answer: Yes, XC6123D733MR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  8. Question: Does XC6123D733MR-G have any built-in protection features?
    Answer: Yes, XC6123D733MR-G has built-in overcurrent and thermal shutdown protection features to ensure safe operation.

  9. Question: What is the package type of XC6123D733MR-G?
    Answer: XC6123D733MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.

  10. Question: Can XC6123D733MR-G be used in industrial control systems?
    Answer: Yes, XC6123D733MR-G can be used in industrial control systems as it operates reliably in a wide temperature range of -40°C to +105°C.

Please note that the answers provided here are general and may vary depending on the specific application requirements and datasheet specifications of XC6123D733MR-G.