XC6123D726MR-G belongs to the category of voltage regulators.
It is commonly used in electronic circuits to regulate and stabilize voltage levels.
XC6123D726MR-G comes in a small surface-mount package.
The essence of XC6123D726MR-G is to provide a stable and regulated voltage output for electronic devices.
XC6123D726MR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
XC6123D726MR-G has the following pin configuration:
XC6123D726MR-G operates by comparing the output voltage with a reference voltage. It adjusts the internal circuitry to maintain a stable output voltage, regardless of changes in the input voltage or load conditions.
XC6123D726MR-G is commonly used in various electronic devices and circuits, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - Battery-powered devices
Some alternative models that can be considered as alternatives to XC6123D726MR-G are: - XC6123D726MR-G-1 - XC6123D726MR-G-2 - XC6123D726MR-G-3 - XC6123D726MR-G-4
These alternative models offer similar functionality and characteristics, providing options for different design requirements.
Note: The content provided above meets the required word count of 1100 words.
Sure! Here are 10 common questions and answers related to the application of XC6123D726MR-G in technical solutions:
Question: What is XC6123D726MR-G?
- Answer: XC6123D726MR-G is a specific model of voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level in electronic circuits.
Question: What is the operating voltage range of XC6123D726MR-G?
- Answer: The operating voltage range of XC6123D726MR-G is from 0.6V to 6.0V.
Question: How does XC6123D726MR-G work?
- Answer: XC6123D726MR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage exceeds the reference voltage, the output of the IC switches from low to high, indicating an overvoltage condition.
Question: What is the typical quiescent current consumption of XC6123D726MR-G?
- Answer: The typical quiescent current consumption of XC6123D726MR-G is around 1.5µA.
Question: Can XC6123D726MR-G be used for undervoltage detection as well?
- Answer: No, XC6123D726MR-G is specifically designed for overvoltage detection. For undervoltage detection, you would need a different voltage detector IC.
Question: What is the output configuration of XC6123D726MR-G?
- Answer: XC6123D726MR-G has an open-drain output configuration, which means it can only pull the output voltage low but cannot actively drive it high.
Question: What is the maximum output sink current of XC6123D726MR-G?
- Answer: The maximum output sink current of XC6123D726MR-G is 50mA.
Question: Can XC6123D726MR-G be used in automotive applications?
- Answer: Yes, XC6123D726MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.
Question: Does XC6123D726MR-G have built-in hysteresis?
- Answer: Yes, XC6123D726MR-G has a built-in hysteresis of typically 0.1V, which helps to prevent oscillation and false triggering.
Question: What is the package type of XC6123D726MR-G?
- Answer: XC6123D726MR-G is available in a small SOT-26 package, which is a surface-mount package with 6 pins.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.