Torex Semiconductor Ltd
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6123D533MR-G
Lihat Detail Lembar Data

XC6123D533MR-G

Product Overview

Category

XC6123D533MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6123D533MR-G comes in a small surface-mount package.

Essence

The essence of XC6123D533MR-G lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

It is typically packaged in reels and available in quantities of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6123D533MR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation
  • Overcurrent protection
  • Thermal shutdown protection

Advantages

  • Small form factor
  • High efficiency
  • Wide input voltage range
  • Overcurrent and thermal protection ensure device safety

Disadvantages

  • Limited output current capacity
  • Not suitable for high-power applications

Working Principles

XC6123D533MR-G utilizes a feedback mechanism to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a stable output.

Detailed Application Field Plans

XC6123D533MR-G finds applications in various electronic devices, including but not limited to:

  1. Mobile phones
  2. Portable media players
  3. Wearable devices
  4. IoT devices
  5. Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6123D533MR-G are:

  1. XC6206P332MR-G
  2. LM1117-3.3
  3. MCP1700-3302E/TO

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

In conclusion, XC6123D533MR-G is a compact and efficient voltage regulator with a wide range of applications. Its small form factor, high efficiency, and built-in protection features make it an ideal choice for low-power electronic devices.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6123D533MR-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6123D533MR-G in technical solutions:

  1. Question: What is XC6123D533MR-G?
    - Answer: XC6123D533MR-G is a specific model of voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level in electronic circuits.

  2. Question: What is the operating voltage range of XC6123D533MR-G?
    - Answer: The operating voltage range of XC6123D533MR-G is from 0.6V to 6.0V.

  3. Question: How does XC6123D533MR-G work?
    - Answer: XC6123D533MR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or rises above the reference voltage, it triggers an output signal.

  4. Question: What is the output type of XC6123D533MR-G?
    - Answer: XC6123D533MR-G has an open-drain output type, which means it can sink current but cannot source current.

  5. Question: What is the typical quiescent current consumption of XC6123D533MR-G?
    - Answer: The typical quiescent current consumption of XC6123D533MR-G is around 1.0µA.

  6. Question: Can XC6123D533MR-G be used for undervoltage and overvoltage detection?
    - Answer: Yes, XC6123D533MR-G can be used for both undervoltage and overvoltage detection, depending on how it is configured.

  7. Question: What is the accuracy of XC6123D533MR-G?
    - Answer: The accuracy of XC6123D533MR-G is typically ±2%.

  8. Question: Can XC6123D533MR-G be used in automotive applications?
    - Answer: Yes, XC6123D533MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  9. Question: What is the package type of XC6123D533MR-G?
    - Answer: XC6123D533MR-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

  10. Question: Are there any application notes or reference designs available for XC6123D533MR-G?
    - Answer: Yes, Torex Semiconductor provides application notes and reference designs for XC6123D533MR-G on their official website. These resources can help in understanding and implementing the IC in various technical solutions.

Please note that the answers provided here are general and may vary depending on specific requirements and use cases. It is always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate and detailed information.