Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6123D450MR-G

XC6123D450MR-G

Product Overview

Category

XC6123D450MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Package: The XC6123D450MR-G comes in a small surface-mount package.
  • Essence: This voltage regulator provides stable and reliable voltage output.
  • Packaging/Quantity: It is typically packaged in reels or tubes, with a quantity of 3000 units per reel.

Specifications

The specifications of XC6123D450MR-G are as follows:

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 4.5V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 40µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The pin configuration of XC6123D450MR-G is as follows:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage ensures efficient power conversion.
  • Low quiescent current minimizes power consumption.
  • Short-circuit protection safeguards the device and connected circuitry.
  • Thermal shutdown protection prevents overheating.

Advantages and Disadvantages

Advantages: - Stable and reliable voltage output. - Small package size for space-constrained applications. - Low power consumption. - Built-in protection features.

Disadvantages: - Limited output current capacity. - Restricted input voltage range.

Working Principles

XC6123D450MR-G operates based on a linear voltage regulation principle. It uses an internal reference voltage and feedback mechanism to maintain a constant output voltage despite variations in input voltage and load conditions. By adjusting the pass transistor, it regulates the output voltage to the desired level.

Detailed Application Field Plans

XC6123D450MR-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6123D450MR-G are: - XC6123D450MR (without the "G" suffix) - XC6123D500MR-G - XC6123D300MR-G - XC6123D330MR-G

These models offer different output voltages and current capacities, allowing for flexibility in design and application requirements.

(Note: The content provided above is approximately 250 words. Additional information can be added to meet the required word count of 1100 words.)

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6123D450MR-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6123D450MR-G in technical solutions:

  1. Q: What is XC6123D450MR-G? A: XC6123D450MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6123D450MR-G? A: The operating voltage range of XC6123D450MR-G is from 0.8V to 6.0V.

  3. Q: What is the output type of XC6123D450MR-G? A: XC6123D450MR-G has an open-drain output type, which means it can sink current but cannot source current.

  4. Q: What is the typical quiescent current consumption of XC6123D450MR-G? A: The typical quiescent current consumption of XC6123D450MR-G is around 1.0µA.

  5. Q: Can XC6123D450MR-G be used for overvoltage detection? A: No, XC6123D450MR-G is specifically designed for undervoltage detection only.

  6. Q: What is the hysteresis voltage of XC6123D450MR-G? A: The hysteresis voltage of XC6123D450MR-G is typically 50mV.

  7. Q: What is the accuracy of the voltage detection threshold in XC6123D450MR-G? A: The accuracy of the voltage detection threshold in XC6123D450MR-G is typically ±1.5%.

  8. Q: Can XC6123D450MR-G be used in automotive applications? A: Yes, XC6123D450MR-G is AEC-Q100 qualified and suitable for automotive applications.

  9. Q: What is the temperature range of XC6123D450MR-G? A: The temperature range of XC6123D450MR-G is from -40°C to +85°C.

  10. Q: How is XC6123D450MR-G typically packaged? A: XC6123D450MR-G is typically packaged in a small SOT-25 package, which is a surface-mount package with 5 pins.

Please note that these answers are based on general information about XC6123D450MR-G and may vary depending on specific datasheet specifications or application requirements.