XC6123D326MR-G belongs to the category of voltage regulators.
It is primarily used for regulating voltage in electronic circuits.
XC6123D326MR-G comes in a small surface-mount package.
The essence of XC6123D326MR-G lies in its ability to provide stable and regulated voltage to electronic devices.
It is typically packaged in reels and available in quantities of 3000 units per reel.
XC6123D326MR-G has the following pin configuration:
XC6123D326MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. The regulator continuously monitors the input voltage, output voltage, and load conditions to ensure proper regulation.
XC6123D326MR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Embedded systems
Some alternative models that offer similar functionality to XC6123D326MR-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT
Sure! Here are 10 common questions and answers related to the application of XC6123D326MR-G in technical solutions:
Q: What is XC6123D326MR-G? A: XC6123D326MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Q: What is the operating voltage range of XC6123D326MR-G? A: The operating voltage range of XC6123D326MR-G is from 0.8V to 6.0V.
Q: What is the output type of XC6123D326MR-G? A: XC6123D326MR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve different logic levels.
Q: What is the typical quiescent current consumption of XC6123D326MR-G? A: The typical quiescent current consumption of XC6123D326MR-G is very low, usually around 1.0µA.
Q: Can XC6123D326MR-G be used for overvoltage detection? A: No, XC6123D326MR-G is specifically designed for undervoltage detection. It triggers an output signal when the monitored voltage falls below a certain threshold.
Q: What is the accuracy of the undervoltage detection threshold in XC6123D326MR-G? A: The accuracy of the undervoltage detection threshold in XC6123D326MR-G is typically ±1.5%.
Q: Is XC6123D326MR-G suitable for automotive applications? A: Yes, XC6123D326MR-G is AEC-Q100 qualified, making it suitable for automotive applications where reliable undervoltage detection is required.
Q: Can XC6123D326MR-G be used in battery-powered devices? A: Yes, XC6123D326MR-G's low quiescent current consumption makes it suitable for battery-powered devices, helping to conserve power.
Q: What is the package type of XC6123D326MR-G? A: XC6123D326MR-G is available in a small SOT-25 package, which is compact and easy to integrate into various PCB designs.
Q: Are there any additional features or protections in XC6123D326MR-G? A: Yes, XC6123D326MR-G includes built-in hysteresis, which helps to prevent output oscillation near the threshold voltage, ensuring stable operation.
Please note that these answers are general and may vary depending on the specific datasheet and application requirements.