Lihat spesifikasi untuk detail produk.
XC6123C544MR-G
Product Overview
Category
XC6123C544MR-G belongs to the category of electronic components.
Use
It is commonly used in various electronic devices and circuits for voltage regulation purposes.
Characteristics
- Small form factor
- High precision voltage regulation
- Low power consumption
- Wide input voltage range
- Stable output voltage
Package
XC6123C544MR-G is available in a compact surface mount package.
Essence
The essence of XC6123C544MR-G lies in its ability to provide accurate and stable voltage regulation, ensuring proper functioning of electronic devices.
Packaging/Quantity
XC6123C544MR-G is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 3.3V
- Output Current: 150mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6123C544MR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- EN: Enable pin (optional)
Functional Features
- Voltage regulation: XC6123C544MR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
- Low quiescent current: The device consumes minimal current when not actively regulating the voltage.
- Thermal shutdown protection: It incorporates a thermal shutdown feature to prevent overheating.
Advantages and Disadvantages
Advantages
- High precision voltage regulation ensures reliable performance of electronic devices.
- Small form factor allows for easy integration into compact designs.
- Wide input voltage range provides flexibility in various applications.
- Low power consumption contributes to energy efficiency.
Disadvantages
- Limited output current may not be suitable for high-power applications.
- Lack of built-in protection features against overvoltage or reverse polarity.
Working Principles
XC6123C544MR-G utilizes a voltage reference, error amplifier, and pass transistor to regulate the output voltage. The voltage reference compares the output voltage with a reference voltage, and the error amplifier adjusts the pass transistor accordingly to maintain the desired output voltage.
Detailed Application Field Plans
XC6123C544MR-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Industrial control systems - Automotive electronics
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6123C544MR-G are: - XC6206P332MR-G - XC6220B332MR-G - XC6219B332MR-G - XC6221B332MR-G - XC6222B332MR-G
These models offer similar voltage regulation capabilities and can be chosen based on specific requirements and availability.
Word count: 452 words
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6123C544MR-G dalam solusi teknis
Sure! Here are 10 common questions and answers related to the application of XC6123C544MR-G in technical solutions:
Question: What is XC6123C544MR-G?
- Answer: XC6123C544MR-G is a specific model of voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.Question: What is the operating voltage range of XC6123C544MR-G?
- Answer: The operating voltage range of XC6123C544MR-G is typically between 0.8V and 6.0V.Question: How does XC6123C544MR-G detect voltage levels?
- Answer: XC6123C544MR-G uses an internal voltage reference and a comparator to compare the input voltage with a preset threshold. When the input voltage drops below the threshold, the output of the comparator changes state.Question: What is the output configuration of XC6123C544MR-G?
- Answer: XC6123C544MR-G has an open-drain output configuration, which means it can sink current but cannot source current. An external pull-up resistor is required to provide the output voltage level.Question: What is the typical quiescent current consumption of XC6123C544MR-G?
- Answer: The typical quiescent current consumption of XC6123C544MR-G is very low, usually around 1.0µA.Question: Can XC6123C544MR-G be used in battery-powered applications?
- Answer: Yes, XC6123C544MR-G is suitable for battery-powered applications due to its low quiescent current consumption, which helps to conserve battery life.Question: What is the hysteresis feature of XC6123C544MR-G?
- Answer: XC6123C544MR-G has built-in hysteresis, which means that once the input voltage falls below the threshold and triggers the output, the input voltage must rise above a higher threshold before the output returns to its original state. This prevents oscillation or rapid switching of the output in noisy environments.Question: Can XC6123C544MR-G be used for overvoltage detection?
- Answer: No, XC6123C544MR-G is specifically designed for undervoltage detection. It triggers the output when the voltage falls below the threshold, not when it exceeds a certain level.Question: What is the maximum operating temperature range of XC6123C544MR-G?
- Answer: The maximum operating temperature range of XC6123C544MR-G is typically between -40°C and +85°C.Question: Are there any application examples where XC6123C544MR-G can be used?
- Answer: Yes, XC6123C544MR-G can be used in various applications such as battery-powered devices, portable electronics, automotive systems, power management circuits, and many other technical solutions where undervoltage detection is required.
Please note that the answers provided here are general and may vary depending on the specific requirements and datasheet of XC6123C544MR-G.