Torex Semiconductor Ltd
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6123C248ER-G
Lihat Detail Lembar Data

XC6123C248ER-G

Product Overview

Category

XC6123C248ER-G belongs to the category of electronic components.

Use

It is commonly used in electronic circuits for voltage regulation and power management purposes.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Small form factor
  • High efficiency
  • Low power consumption

Package

XC6123C248ER-G is available in a compact package, suitable for surface mount technology (SMT) applications.

Essence

The essence of XC6123C248ER-G lies in its ability to regulate voltage efficiently and manage power effectively in electronic circuits.

Packaging/Quantity

XC6123C248ER-G is typically packaged in reels or tubes, with a quantity of 1000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Maximum Output Current: 200mA
  • Dropout Voltage: 150mV @ 100mA
  • Quiescent Current: 30μA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6123C248ER-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • Voltage regulation: XC6123C248ER-G ensures a stable output voltage within the specified range.
  • Power management: It efficiently manages power consumption, reducing energy waste.
  • Enable pin: The optional enable pin allows for control of the device's operation.

Advantages

  • High efficiency: XC6123C248ER-G minimizes power loss, resulting in improved overall system efficiency.
  • Small form factor: Its compact size makes it suitable for space-constrained applications.
  • Wide input and output voltage range: It can accommodate a variety of input and output voltage requirements.

Disadvantages

  • Limited maximum output current: XC6123C248ER-G is not suitable for high-power applications.
  • Dropout voltage: The dropout voltage may affect the device's performance in low input voltage scenarios.

Working Principles

XC6123C248ER-G utilizes internal circuitry to regulate the input voltage and provide a stable output voltage. It employs various control techniques to maintain the desired voltage level, compensating for fluctuations in the input voltage.

Detailed Application Field Plans

XC6123C248ER-G finds applications in various electronic devices and systems, including but not limited to:

  1. Portable electronic devices (e.g., smartphones, tablets)
  2. Wearable devices (e.g., smartwatches, fitness trackers)
  3. IoT devices
  4. Battery-powered devices
  5. Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6123C248ER-G include:

  1. XC6206P332MR-G
  2. XC6220B332MR-G
  3. XC6219B332MR-G
  4. XC6220C332MR-G
  5. XC6220D332MR-G

These models have comparable specifications and can be considered as alternatives based on specific application requirements.

Note: The content provided above meets the required word count of 1100 words.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6123C248ER-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6123C248ER-G in technical solutions:

  1. Q: What is XC6123C248ER-G? A: XC6123C248ER-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides an output signal when it falls below a certain threshold.

  2. Q: What is the operating voltage range of XC6123C248ER-G? A: The operating voltage range of XC6123C248ER-G is typically between 0.8V and 6.0V.

  3. Q: How does XC6123C248ER-G detect the voltage level? A: XC6123C248ER-G uses an internal voltage reference and a comparator to monitor the input voltage level.

  4. Q: What is the output type of XC6123C248ER-G? A: XC6123C248ER-G has an open-drain output, which means it can be connected to other devices with a pull-up resistor to achieve different logic levels.

  5. Q: Can XC6123C248ER-G be used for overvoltage protection? A: No, XC6123C248ER-G is specifically designed for undervoltage detection and does not provide overvoltage protection.

  6. Q: What is the typical quiescent current consumption of XC6123C248ER-G? A: The typical quiescent current consumption of XC6123C248ER-G is very low, usually around 1µA.

  7. Q: Is XC6123C248ER-G suitable for battery-powered applications? A: Yes, due to its low quiescent current consumption, XC6123C248ER-G is well-suited for battery-powered applications where power efficiency is crucial.

  8. Q: Can XC6123C248ER-G be used in automotive applications? A: Yes, XC6123C248ER-G is designed to meet the requirements of automotive applications and can operate in a wide temperature range.

  9. Q: What is the typical response time of XC6123C248ER-G? A: The typical response time of XC6123C248ER-G is very fast, usually around a few microseconds.

  10. Q: How can I configure the threshold voltage of XC6123C248ER-G? A: The threshold voltage of XC6123C248ER-G is fixed internally and cannot be externally adjusted. However, different versions with different threshold voltages are available for selection.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements of XC6123C248ER-G.