Torex Semiconductor Ltd
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6122F742MR-G
Lihat Detail Lembar Data

XC6122F742MR-G

Product Overview

Category

XC6122F742MR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation
  • Stabilization of voltage levels
  • Compact size
  • Low power consumption

Package

XC6122F742MR-G comes in a small surface-mount package.

Essence

The essence of XC6122F742MR-G is to provide a stable and regulated voltage output for electronic devices.

Packaging/Quantity

XC6122F742MR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Output Current: 200mA (maximum)
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122F742MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • Small size allows for space-saving designs
  • Low power consumption prolongs battery life
  • Wide input voltage range provides flexibility in various applications
  • Built-in protection features enhance reliability

Disadvantages

  • Limited output current may not be suitable for high-power applications
  • Temperature range may restrict usage in extreme environments

Working Principles

XC6122F742MR-G operates by comparing the output voltage with a reference voltage. It adjusts the internal resistance to maintain a stable output voltage, compensating for changes in input voltage and load conditions.

Detailed Application Field Plans

XC6122F742MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122F742MR-G are: - XC6206P332MR - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar functionality and specifications, providing options for different design requirements.

Word count: 314 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6122F742MR-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6122F742MR-G in technical solutions:

  1. Question: What is XC6122F742MR-G?
    Answer: XC6122F742MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122F742MR-G?
    Answer: The operating voltage range of XC6122F742MR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6122F742MR-G work?
    Answer: XC6122F742MR-G works by comparing the input voltage with a reference voltage. When the input voltage falls below or exceeds a certain threshold, it triggers an output signal.

  4. Question: What is the output type of XC6122F742MR-G?
    Answer: XC6122F742MR-G has an open-drain output type, which means it can be connected to other devices through a pull-up resistor.

  5. Question: What is the typical quiescent current consumption of XC6122F742MR-G?
    Answer: The typical quiescent current consumption of XC6122F742MR-G is very low, usually around 1.0µA.

  6. Question: Can XC6122F742MR-G be used for undervoltage and overvoltage detection?
    Answer: Yes, XC6122F742MR-G can be used for both undervoltage and overvoltage detection, depending on how it is configured.

  7. Question: What is the accuracy of the voltage detection in XC6122F742MR-G?
    Answer: The accuracy of voltage detection in XC6122F742MR-G is typically ±1.5%.

  8. Question: Can XC6122F742MR-G be used in automotive applications?
    Answer: Yes, XC6122F742MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  9. Question: What is the temperature range of operation for XC6122F742MR-G?
    Answer: XC6122F742MR-G has an extended temperature range of -40°C to +105°C, making it suitable for various environments.

  10. Question: Is XC6122F742MR-G available in different package options?
    Answer: Yes, XC6122F742MR-G is available in a variety of package options, including SOT-25 and USP-4B, providing flexibility for different design requirements.

Please note that these answers are general and may vary depending on the specific datasheet and application guidelines provided by Torex Semiconductor for XC6122F742MR-G.