Torex Semiconductor Ltd
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6122F642MR-G
Lihat Detail Lembar Data

XC6122F642MR-G

Product Overview

Category

XC6122F642MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • Low power consumption
  • High accuracy
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6122F642MR-G comes in a small surface-mount package.

Essence

The essence of XC6122F642MR-G lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

It is typically packaged in reels and available in quantities of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.0V
  • Output Current: Up to 200mA
  • Dropout Voltage: 150mV (at 100mA)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122F642MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Voltage regulation: XC6122F642MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the circuit by limiting the output current in case of excessive load.
  • Thermal shutdown protection: It prevents overheating by shutting down the device when the temperature exceeds a certain threshold.

Advantages and Disadvantages

Advantages

  • Small form factor allows for space-saving designs.
  • Low power consumption prolongs battery life in portable devices.
  • Wide input voltage range makes it compatible with various power sources.
  • Overcurrent and thermal protection enhance circuit reliability.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6122F642MR-G operates based on the principle of feedback control. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a stable output. By continuously monitoring the voltage, it compensates for any changes in the input voltage or load conditions.

Detailed Application Field Plans

XC6122F642MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6122F642MR-G are: - XC6206P332MR-G - XC6210B182MR-G - XC6220B332MR-G - XC6230C502MR-G - XC6240D682MR-G

These models have comparable specifications and can be used as alternatives depending on specific requirements.

Word count: 345 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6122F642MR-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6122F642MR-G in technical solutions:

  1. Question: What is XC6122F642MR-G?
    - Answer: XC6122F642MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122F642MR-G?
    - Answer: The operating voltage range of XC6122F642MR-G is from 0.65V to 6.0V.

  3. Question: What is the output type of XC6122F642MR-G?
    - Answer: XC6122F642MR-G has an open-drain output type, which means it can be connected to other devices or circuits to indicate the status of the monitored voltage.

  4. Question: What is the typical quiescent current consumption of XC6122F642MR-G?
    - Answer: The typical quiescent current consumption of XC6122F642MR-G is around 1.0µA, making it suitable for low-power applications.

  5. Question: Can XC6122F642MR-G detect both overvoltage and undervoltage conditions?
    - Answer: No, XC6122F642MR-G is specifically designed to detect undervoltage conditions only. It triggers an output signal when the monitored voltage falls below a certain threshold.

  6. Question: What is the accuracy of the undervoltage detection threshold in XC6122F642MR-G?
    - Answer: The accuracy of the undervoltage detection threshold in XC6122F642MR-G is typically ±2%.

  7. Question: How does XC6122F642MR-G indicate the undervoltage condition?
    - Answer: When the monitored voltage falls below the detection threshold, the output of XC6122F642MR-G is pulled low (active low), indicating the undervoltage condition.

  8. Question: Can XC6122F642MR-G be used in automotive applications?
    - Answer: Yes, XC6122F642MR-G is AEC-Q100 qualified and suitable for automotive applications, providing reliable undervoltage monitoring.

  9. Question: What is the temperature range of operation for XC6122F642MR-G?
    - Answer: XC6122F642MR-G has an operating temperature range of -40°C to +85°C, making it suitable for a wide range of environments.

  10. Question: Is XC6122F642MR-G available in different package options?
    - Answer: Yes, XC6122F642MR-G is available in a SOT-25 package, which is a small surface-mount package commonly used in electronic devices.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.