Torex Semiconductor Ltd
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6122E748MR-G
Lihat Detail Lembar Data

XC6122E748MR-G

Product Overview

Category

XC6122E748MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • High efficiency

Package

XC6122E748MR-G comes in a small surface-mount package.

Essence

The essence of XC6122E748MR-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

It is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.8V - 5.0V
  • Output Current: 150mA (max)
  • Dropout Voltage: 200mV (typ)
  • Quiescent Current: 30µA (typ)

Detailed Pin Configuration

XC6122E748MR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6122E748MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to prevent damage to the circuitry.
  • Thermal shutdown: In case of excessive temperature, it shuts down to protect itself from overheating.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • Low power consumption helps conserve energy.
  • High efficiency results in minimal power loss during voltage regulation.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Narrow input voltage range restricts compatibility with certain systems.

Working Principles

XC6122E748MR-G operates on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage.

Detailed Application Field Plans

XC6122E748MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122E748MR-G are: - XC6206P332MR - XC6219B182MR - XC6220C502MR

These models offer similar voltage regulation capabilities and come in different package options to suit specific design requirements.

In conclusion, XC6122E748MR-G is a compact voltage regulator with excellent voltage regulation capabilities. Its small size, low power consumption, and high efficiency make it suitable for various electronic applications. However, its limited output current and narrow input voltage range should be taken into consideration when selecting an appropriate voltage regulator for specific system requirements.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6122E748MR-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6122E748MR-G in technical solutions:

  1. Question: What is XC6122E748MR-G?
    - Answer: XC6122E748MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122E748MR-G?
    - Answer: The operating voltage range of XC6122E748MR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6122E748MR-G work?
    - Answer: XC6122E748MR-G works by comparing the input voltage with a reference voltage. When the input voltage falls below a certain threshold, it triggers an output signal, indicating a low voltage condition.

  4. Question: What is the output type of XC6122E748MR-G?
    - Answer: XC6122E748MR-G has an open-drain output type, which means it can be connected to other devices through a pull-up resistor to achieve different logic levels.

  5. Question: What is the quiescent current consumption of XC6122E748MR-G?
    - Answer: The quiescent current consumption of XC6122E748MR-G is typically very low, usually around 1.0µA.

  6. Question: Can XC6122E748MR-G be used for undervoltage detection?
    - Answer: Yes, XC6122E748MR-G is specifically designed for undervoltage detection, making it suitable for applications where monitoring low voltage conditions is critical.

  7. Question: What is the accuracy of XC6122E748MR-G?
    - Answer: The accuracy of XC6122E748MR-G is typically ±1.5% at room temperature.

  8. Question: Can XC6122E748MR-G be used in automotive applications?
    - Answer: Yes, XC6122E748MR-G is AEC-Q100 qualified, making it suitable for automotive applications that require high reliability and performance.

  9. Question: What is the package type of XC6122E748MR-G?
    - Answer: XC6122E748MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.

  10. Question: Are there any additional features or protections in XC6122E748MR-G?
    - Answer: Yes, XC6122E748MR-G includes features like hysteresis, which helps to prevent output oscillation near the threshold voltage, and a built-in delay circuit to avoid false detection caused by voltage fluctuations.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.