Torex Semiconductor Ltd
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6122D743MR-G
Lihat Detail Lembar Data

XC6122D743MR-G

Product Overview

Category

XC6122D743MR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • Low power consumption
  • High precision
  • Wide input voltage range

Package

XC6122D743MR-G comes in a small surface mount package.

Essence

The essence of XC6122D743MR-G is its ability to regulate voltage efficiently and accurately.

Packaging/Quantity

It is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 1.8V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 1μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122D743MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • Small form factor
  • High precision voltage regulation
  • Wide input voltage range
  • Low power consumption

Disadvantages

  • Limited output current capacity (150mA)

Working Principles

XC6122D743MR-G operates by comparing the output voltage with a reference voltage and adjusting the internal circuitry to maintain a stable output voltage. It uses a feedback mechanism to continuously monitor and regulate the output voltage.

Detailed Application Field Plans

XC6122D743MR-G is widely used in various electronic devices and applications, including: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models to XC6122D743MR-G include: - XC6206P332MR-G - XC6206P332PR-G - XC6206P332DR-G - XC6206P332ER-G

These alternative models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

In conclusion, XC6122D743MR-G is a compact voltage regulator with high precision and wide input voltage range. It is commonly used in various electronic devices and offers advantages such as low power consumption and small form factor. However, it has a limited output current capacity.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6122D743MR-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6122D743MR-G in technical solutions:

  1. Question: What is XC6122D743MR-G?
    - Answer: XC6122D743MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122D743MR-G?
    - Answer: The operating voltage range of XC6122D743MR-G is typically between 0.7V and 6.0V.

  3. Question: How does XC6122D743MR-G work?
    - Answer: XC6122D743MR-G works by continuously monitoring the input voltage and comparing it to a fixed reference voltage. When the input voltage falls below a certain threshold, the output of the IC changes state, indicating a low voltage condition.

  4. Question: What is the output configuration of XC6122D743MR-G?
    - Answer: XC6122D743MR-G has an open-drain output configuration, which means that it can only pull the output voltage low but cannot drive it high. An external pull-up resistor is required to provide the high voltage level.

  5. Question: What is the typical quiescent current consumption of XC6122D743MR-G?
    - Answer: The typical quiescent current consumption of XC6122D743MR-G is very low, usually around 1.0µA, making it suitable for battery-powered applications.

  6. Question: Can XC6122D743MR-G be used for overvoltage detection?
    - Answer: No, XC6122D743MR-G is specifically designed for undervoltage detection. It triggers an output when the input voltage falls below a certain threshold.

  7. Question: What is the typical accuracy of XC6122D743MR-G?
    - Answer: The typical accuracy of XC6122D743MR-G is ±1.5% of the detection voltage, providing reliable voltage monitoring in various applications.

  8. Question: Can XC6122D743MR-G be used in automotive applications?
    - Answer: Yes, XC6122D743MR-G is AEC-Q100 qualified and suitable for automotive applications, such as battery management systems, power supplies, and control modules.

  9. Question: Does XC6122D743MR-G have any built-in hysteresis?
    - Answer: Yes, XC6122D743MR-G has a built-in hysteresis of typically 50mV, which helps to prevent output oscillation near the detection threshold.

  10. Question: What is the package type of XC6122D743MR-G?
    - Answer: XC6122D743MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.