Torex Semiconductor Ltd
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6122D731ER-G
Lihat Detail Lembar Data

XC6122D731ER-G

Product Overview

Category

XC6122D731ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Small size and lightweight
  • Low power consumption
  • High precision voltage regulation
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6122D731ER-G comes in a small surface mount package.

Essence

The essence of XC6122D731ER-G is its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

It is typically packaged in reels or tubes, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.0V
  • Output Current: 150mA (max)
  • Dropout Voltage: 200mV (typ)
  • Quiescent Current: 30μA (typ)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122D731ER-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6122D731ER-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the circuit by limiting the current when it exceeds the specified limit.
  • Thermal shutdown protection: In case of excessive heat, the regulator shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into space-constrained designs.
  • Low power consumption helps conserve energy.
  • Wide input voltage range makes it compatible with various power sources.
  • Overcurrent and thermal shutdown protection enhance circuit reliability.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage can cause a slight voltage drop across the regulator.

Working Principles

XC6122D731ER-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. This is achieved through a combination of active and passive components within the regulator.

Detailed Application Field Plans

XC6122D731ER-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Its compact size, low power consumption, and voltage regulation capabilities make it suitable for these applications.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6122D731ER-G are: - LM1117-3.3V - MCP1700-3302E/TO - TS2940CP33

These models can be considered as alternatives depending on specific requirements and design constraints.

Word count: 346 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6122D731ER-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6122D731ER-G in technical solutions:

  1. Question: What is XC6122D731ER-G?
    Answer: XC6122D731ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122D731ER-G?
    Answer: The operating voltage range of XC6122D731ER-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6122D731ER-G work?
    Answer: XC6122D731ER-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below a certain threshold, it triggers an output signal indicating a low voltage condition.

  4. Question: What is the output type of XC6122D731ER-G?
    Answer: XC6122D731ER-G has an open-drain output type, which means it can be connected to other devices through a pull-up resistor to achieve different logic levels.

  5. Question: What is the quiescent current consumption of XC6122D731ER-G?
    Answer: The quiescent current consumption of XC6122D731ER-G is typically very low, around 1.0µA, making it suitable for battery-powered applications.

  6. Question: Can XC6122D731ER-G be used for overvoltage detection?
    Answer: No, XC6122D731ER-G is specifically designed for undervoltage detection. It triggers an output signal when the input voltage falls below the threshold voltage.

  7. Question: What is the typical response time of XC6122D731ER-G?
    Answer: The typical response time of XC6122D731ER-G is around 200µs, which means it can quickly detect and respond to voltage changes.

  8. Question: Can XC6122D731ER-G be used in automotive applications?
    Answer: Yes, XC6122D731ER-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  9. Question: What is the temperature range of XC6122D731ER-G?
    Answer: XC6122D731ER-G has an operating temperature range of -40°C to +85°C, making it suitable for a wide range of environments.

  10. Question: Is XC6122D731ER-G available in different package options?
    Answer: Yes, XC6122D731ER-G is available in various package options, including SOT-23-5 and USP-6B, providing flexibility for different design requirements.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application guidelines provided by the manufacturer.