Torex Semiconductor Ltd
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6122D628ER-G
Lihat Detail Lembar Data

XC6122D628ER-G

Product Overview

Category

XC6122D628ER-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize the voltage in electronic circuits.

Characteristics

  • Voltage regulation
  • Stabilization
  • Compact size
  • Low power consumption

Package

XC6122D628ER-G comes in a small surface-mount package.

Essence

The essence of XC6122D628ER-G is to provide a stable and regulated voltage supply to electronic devices.

Packaging/Quantity

XC6122D628ER-G is typically packaged in reels and is available in quantities of 1000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.8V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122D628ER-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6122D628ER-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to prevent damage to connected devices.
  • Thermal shutdown: In case of excessive temperature, the regulator shuts down to avoid overheating.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact electronic devices.
  • Low power consumption helps conserve energy.
  • Provides stable voltage output even under varying load conditions.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6122D628ER-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage. This ensures that the connected electronic devices receive a stable power supply.

Detailed Application Field Plans

XC6122D628ER-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models to XC6122D628ER-G include: - XC6206P282MR-G - LM1117MPX-2.8/NOPB - MCP1700T-2802E/TT

These models offer similar voltage regulation capabilities and can be used as alternatives depending on specific requirements.

Word count: 345 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6122D628ER-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6122D628ER-G in technical solutions:

  1. Question: What is XC6122D628ER-G?
    Answer: XC6122D628ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level in electronic circuits.

  2. Question: What is the operating voltage range of XC6122D628ER-G?
    Answer: The operating voltage range of XC6122D628ER-G is from 0.8V to 6.0V.

  3. Question: How does XC6122D628ER-G work?
    Answer: XC6122D628ER-G continuously monitors the input voltage and compares it with a reference voltage. When the input voltage falls below the reference voltage, an internal reset signal is generated.

  4. Question: What is the purpose of the reset signal generated by XC6122D628ER-G?
    Answer: The reset signal is used to initiate a system reset or shutdown sequence when the input voltage drops below a certain threshold.

  5. Question: Can XC6122D628ER-G be used in battery-powered applications?
    Answer: Yes, XC6122D628ER-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Question: What is the output type of XC6122D628ER-G?
    Answer: XC6122D628ER-G has an open-drain output type, which means it requires an external pull-up resistor to provide a logic high level.

  7. Question: What is the typical accuracy of the voltage detection threshold in XC6122D628ER-G?
    Answer: The typical accuracy of the voltage detection threshold in XC6122D628ER-G is ±1.5%.

  8. Question: Can XC6122D628ER-G be used to detect overvoltage conditions?
    Answer: No, XC6122D628ER-G is specifically designed for undervoltage detection and does not have the capability to detect overvoltage conditions.

  9. Question: What is the maximum operating temperature range of XC6122D628ER-G?
    Answer: The maximum operating temperature range of XC6122D628ER-G is from -40°C to +85°C.

  10. Question: Is XC6122D628ER-G available in different package options?
    Answer: Yes, XC6122D628ER-G is available in a variety of package options, including SOT-25, SOT-89, and USP-6B.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.