Lihat spesifikasi untuk detail produk.
XC6122C442MR-G
Product Overview
Category
XC6122C442MR-G belongs to the category of voltage regulators.
Use
It is commonly used for regulating voltage in electronic circuits.
Characteristics
- Package: SOT-25
- Essence: Low dropout voltage regulator
- Packaging/Quantity: Tape and reel, 3000 pieces per reel
Specifications
The specifications of XC6122C442MR-G are as follows:
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage Range: 1.2V to 5.5V
- Dropout Voltage: 200mV (typical)
- Maximum Output Current: 150mA
- Quiescent Current: 30µA (typical)
- Line Regulation: ±0.05% (typical)
- Load Regulation: ±0.3% (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6122C442MR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
The functional features of XC6122C442MR-G include:
- Low dropout voltage: The regulator can maintain a stable output voltage even when the input voltage is close to the desired output voltage.
- Low quiescent current: It consumes very low current when there is no load, making it suitable for battery-powered applications.
- Excellent line and load regulation: The regulator provides stable output voltage even with variations in input voltage and load conditions.
- Thermal shutdown protection: It has built-in protection against excessive temperature, ensuring safe operation.
Advantages and Disadvantages
Advantages: - Low dropout voltage ensures efficient power conversion. - Low quiescent current extends battery life. - Excellent line and load regulation for stable output voltage.
Disadvantages: - Maximum output current limited to 150mA, which may not be sufficient for high-power applications. - Limited input voltage range of 2.5V to 6.0V.
Working Principles
XC6122C442MR-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage and adjusting the pass transistor accordingly to maintain a constant output voltage.
Detailed Application Field Plans
XC6122C442MR-G can be used in various applications, including but not limited to:
- Battery-powered devices: It can regulate the voltage for portable electronic devices, such as smartphones, tablets, and wearable devices.
- IoT devices: It is suitable for low-power IoT applications, providing stable voltage for sensors, microcontrollers, and communication modules.
- Automotive electronics: The regulator can be used in automotive applications, ensuring stable voltage for various electronic components.
Detailed and Complete Alternative Models
Some alternative models to XC6122C442MR-G are:
- XC6206P332MR-G: Similar low dropout voltage regulator with a different package (SOT-89).
- XC6220B332MR-G: Low dropout voltage regulator with higher maximum output current (300mA).
- XC6219B332MR-G: Low dropout voltage regulator with wider input voltage range (1.8V to 6.0V).
These alternative models provide similar functionality but may have differences in package, output current, or input voltage range.
Word count: 431 words
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6122C442MR-G dalam solusi teknis
Sure! Here are 10 common questions and answers related to the application of XC6122C442MR-G in technical solutions:
Q: What is XC6122C442MR-G? A: XC6122C442MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6122C442MR-G? A: The operating voltage range of XC6122C442MR-G is typically between 0.8V and 6.0V.
Q: How does XC6122C442MR-G help in technical solutions? A: XC6122C442MR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level, ensuring proper system initialization.
Q: What is the typical reset voltage threshold of XC6122C442MR-G? A: The typical reset voltage threshold of XC6122C442MR-G is 4.42V.
Q: Can XC6122C442MR-G be used in battery-powered applications? A: Yes, XC6122C442MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA, making it suitable for power-sensitive designs.
Q: Does XC6122C442MR-G have any built-in delay time for the reset signal? A: Yes, XC6122C442MR-G has a built-in delay time of typically 200ms to ensure stable power supply before releasing the reset signal.
Q: Is XC6122C442MR-G available in a surface-mount package? A: Yes, XC6122C442MR-G is available in a surface-mount SOT-25 package, which makes it easy to integrate into compact designs.
Q: Can XC6122C442MR-G be used in automotive applications? A: Yes, XC6122C442MR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 1 qualification standards.
Q: What is the maximum operating temperature range of XC6122C442MR-G? A: The maximum operating temperature range of XC6122C442MR-G is typically -40°C to +85°C.
Q: Does XC6122C442MR-G have any additional features or protection mechanisms? A: Yes, XC6122C442MR-G has built-in overcurrent protection and reverse current blocking diodes to safeguard against potential damage caused by voltage spikes or incorrect wiring.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6122C442MR-G.