Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6122A449ER-G

XC6122A449ER-G

Product Overview

Category

XC6122A449ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6122A449ER-G is available in a small surface-mount package.

Essence

The essence of XC6122A449ER-G lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 4.49V
  • Dropout Voltage: 200mV (typical)
  • Maximum Output Current: 150mA
  • Quiescent Current: 45µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122A449ER-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6122A449ER-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the circuit by limiting the output current to prevent damage.
  • Thermal shutdown protection: In case of excessive temperature, the device shuts down to avoid overheating.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • High efficiency results in minimal power loss.
  • Wide input voltage range makes it compatible with various power sources.
  • Overcurrent and thermal shutdown protection enhance the reliability of the circuit.

Disadvantages

  • Limited maximum output current may restrict its use in high-power applications.
  • Dropout voltage may cause a slight decrease in efficiency.

Working Principles

XC6122A449ER-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, compensating for input voltage variations.

Detailed Application Field Plans

XC6122A449ER-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122A449ER-G are: - XC6122B449ER-G - XC6122C449ER-G - XC6122D449ER-G - XC6122E449ER-G

These models offer similar functionality and characteristics, providing flexibility in design choices.

In conclusion, XC6122A449ER-G is a compact voltage regulator with high efficiency and wide input voltage range. Its overcurrent and thermal shutdown protection features make it reliable for various applications. However, its limited maximum output current and dropout voltage should be taken into consideration when selecting an appropriate model for specific requirements.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6122A449ER-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6122A449ER-G in technical solutions:

  1. Question: What is XC6122A449ER-G?
    - Answer: XC6122A449ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122A449ER-G?
    - Answer: The operating voltage range of XC6122A449ER-G is typically between 0.8V and 6.0V.

  3. Question: What is the output configuration of XC6122A449ER-G?
    - Answer: XC6122A449ER-G has an open-drain output configuration, which means it can be connected to other devices or circuits with a pull-up resistor.

  4. Question: What is the purpose of using XC6122A449ER-G in a technical solution?
    - Answer: XC6122A449ER-G is primarily used as a voltage supervisor or reset generator. It ensures that the power supply voltage remains within a specified range, providing stability and preventing damage to sensitive components.

  5. Question: Can XC6122A449ER-G be used in battery-powered applications?
    - Answer: Yes, XC6122A449ER-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.

  6. Question: How accurate is the voltage detection of XC6122A449ER-G?
    - Answer: XC6122A449ER-G has a high accuracy voltage detection with a typical threshold voltage accuracy of ±1.5%.

  7. Question: Does XC6122A449ER-G have any built-in delay time?
    - Answer: Yes, XC6122A449ER-G has a built-in delay time of approximately 200ms to prevent false triggering due to voltage fluctuations or noise.

  8. Question: Can XC6122A449ER-G be used in automotive applications?
    - Answer: Yes, XC6122A449ER-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  9. Question: What is the maximum supply current of XC6122A449ER-G?
    - Answer: The maximum supply current of XC6122A449ER-G is typically 1.0µA, making it highly efficient in power-sensitive designs.

  10. Question: Is XC6122A449ER-G available in different package options?
    - Answer: Yes, XC6122A449ER-G is available in various package options, including SOT-25 and USP-4B, providing flexibility for different design requirements.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application guidelines provided by Torex Semiconductor for XC6122A449ER-G.