Torex Semiconductor Ltd
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6122A428ER-G
Lihat Detail Lembar Data

XC6122A428ER-G

Product Overview

Category

XC6122A428ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • Low power consumption
  • High precision
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6122A428ER-G comes in a small SOT-25 package.

Essence

The essence of XC6122A428ER-G lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

It is typically packaged in reels, with each reel containing a specific quantity of XC6122A428ER-G units.

Specifications

  • Input Voltage Range: 1.7V - 6.0V
  • Output Voltage: 4.28V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 1μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122A428ER-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6122A428ER-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the circuit by limiting the current when it exceeds a certain threshold.
  • Thermal shutdown protection: In case of excessive temperature, the device shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • Low power consumption helps conserve energy.
  • High precision ensures accurate voltage regulation.
  • Wide input voltage range makes it versatile for various applications.

Disadvantages

  • Limited output current may not be suitable for high-power devices.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6122A428ER-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. This is achieved through a combination of active components and passive elements within the device.

Detailed Application Field Plans

XC6122A428ER-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Industrial automation systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122A428ER-G are: - XC6122B428ER-G: Similar specifications with minor variations. - XC6122C428ER-G: Higher output current capability. - XC6122D428ER-G: Lower dropout voltage for more efficient power conversion.

These alternative models provide flexibility in choosing the most suitable voltage regulator based on specific requirements.

Word count: 410 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6122A428ER-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6122A428ER-G in technical solutions:

  1. Question: What is XC6122A428ER-G?
    - Answer: XC6122A428ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122A428ER-G?
    - Answer: The operating voltage range of XC6122A428ER-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6122A428ER-G work?
    - Answer: XC6122A428ER-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below a certain threshold, it triggers an output signal, indicating a low voltage condition.

  4. Question: What is the output type of XC6122A428ER-G?
    - Answer: XC6122A428ER-G has an open-drain output type, which means it can be connected to other devices or circuits to indicate a low voltage condition.

  5. Question: What is the quiescent current consumption of XC6122A428ER-G?
    - Answer: The quiescent current consumption of XC6122A428ER-G is typically very low, usually around 1.0µA.

  6. Question: Can XC6122A428ER-G be used in battery-powered applications?
    - Answer: Yes, XC6122A428ER-G is suitable for battery-powered applications due to its low quiescent current consumption, which helps conserve battery life.

  7. Question: What is the accuracy of the voltage detection threshold in XC6122A428ER-G?
    - Answer: The accuracy of the voltage detection threshold in XC6122A428ER-G is typically ±1.5%.

  8. Question: Can XC6122A428ER-G be used for overvoltage protection?
    - Answer: No, XC6122A428ER-G is specifically designed for undervoltage detection and does not provide overvoltage protection.

  9. Question: What is the temperature range of operation for XC6122A428ER-G?
    - Answer: XC6122A428ER-G has an operating temperature range of -40°C to +85°C.

  10. Question: Is XC6122A428ER-G RoHS compliant?
    - Answer: Yes, XC6122A428ER-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.