Torex Semiconductor Ltd
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6122A249MG-G
Lihat Detail Lembar Data

XC6122A249MG-G

Product Overview

Category

XC6122A249MG-G belongs to the category of voltage regulators.

Use

It is primarily used for voltage regulation in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • High efficiency

Package

XC6122A249MG-G is available in a small surface-mount package.

Essence

The essence of XC6122A249MG-G lies in its ability to regulate voltage levels effectively and efficiently.

Packaging/Quantity

XC6122A249MG-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.49V
  • Output Current: 200mA (maximum)
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 1μA (typical)

Detailed Pin Configuration

XC6122A249MG-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6122A249MG-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to prevent damage to the circuitry.
  • Low dropout voltage: The low dropout voltage enables efficient operation even with low input voltages.
  • Low quiescent current: The device consumes minimal current when not actively regulating the voltage.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into space-constrained designs.
  • High efficiency results in minimal power loss during voltage regulation.
  • Overcurrent protection enhances the reliability of the circuit.

Disadvantages

  • Limited output current capacity may restrict its use in high-power applications.
  • Input voltage range is relatively narrow compared to some other voltage regulators.

Working Principles

XC6122A249MG-G operates based on the principle of feedback control. It continuously monitors the output voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for any variations in the input voltage.

Detailed Application Field Plans

XC6122A249MG-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT (Internet of Things) devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122A249MG-G include: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar voltage regulation capabilities and can be suitable replacements depending on specific requirements.

Word count: 411 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6122A249MG-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6122A249MG-G in technical solutions:

  1. Question: What is XC6122A249MG-G?
    - Answer: XC6122A249MG-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring and detecting voltage levels in various electronic applications.

  2. Question: What is the operating voltage range of XC6122A249MG-G?
    - Answer: The operating voltage range of XC6122A249MG-G is typically between 0.8V and 6.0V.

  3. Question: What is the output type of XC6122A249MG-G?
    - Answer: XC6122A249MG-G has an open-drain output type, which means it can sink current but cannot source current.

  4. Question: What is the typical quiescent current consumption of XC6122A249MG-G?
    - Answer: The typical quiescent current consumption of XC6122A249MG-G is very low, usually around 1.0µA.

  5. Question: Can XC6122A249MG-G be used for overvoltage protection?
    - Answer: No, XC6122A249MG-G is not designed for overvoltage protection. It is primarily used for voltage monitoring and detection purposes.

  6. Question: What is the accuracy of XC6122A249MG-G?
    - Answer: The accuracy of XC6122A249MG-G is typically ±2% at room temperature.

  7. Question: Is XC6122A249MG-G suitable for battery-powered applications?
    - Answer: Yes, XC6122A249MG-G is well-suited for battery-powered applications due to its low quiescent current consumption.

  8. Question: Can XC6122A249MG-G be used in automotive applications?
    - Answer: Yes, XC6122A249MG-G is AEC-Q100 qualified and can be used in automotive applications that require voltage monitoring.

  9. Question: What is the temperature range of XC6122A249MG-G?
    - Answer: The operating temperature range of XC6122A249MG-G is typically between -40°C and +85°C.

  10. Question: How does XC6122A249MG-G indicate voltage detection?
    - Answer: XC6122A249MG-G has an open-drain output pin that pulls low when the detected voltage falls below the threshold voltage set by the user. This can be used to trigger other circuitry or devices based on the voltage level.