Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
XC6121D416ER-G

XC6121D416ER-G

Product Overview

Category

XC6121D416ER-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation
  • Stabilization of voltage levels
  • Compact size
  • Low power consumption

Package

XC6121D416ER-G comes in a small surface-mount package.

Essence

The essence of XC6121D416ER-G lies in its ability to provide stable voltage output for various electronic devices.

Packaging/Quantity

XC6121D416ER-G is typically packaged in reels and is available in large quantities.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 4.16V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6121D416ER-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation within a specified range
  • Low dropout voltage ensures efficient power conversion
  • Low quiescent current for reduced power consumption
  • Thermal shutdown protection to prevent overheating

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into circuit designs
  • Stable voltage output ensures reliable performance of connected devices
  • Low power consumption contributes to energy efficiency

Disadvantages

  • Limited output current may not be suitable for high-power applications
  • Narrow input voltage range restricts compatibility with certain systems

Working Principles

XC6121D416ER-G operates by comparing the output voltage with a reference voltage. Any deviation from the desired output voltage is corrected by adjusting the internal circuitry, ensuring a stable output.

Detailed Application Field Plans

XC6121D416ER-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6121D416ER-G are: - XC6206P416MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

In conclusion, XC6121D416ER-G is a voltage regulator that provides stable voltage output for electronic devices. Its compact size, low power consumption, and thermal shutdown protection make it suitable for a wide range of applications. However, its limited output current and narrow input voltage range should be taken into consideration when selecting an alternative model.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan XC6121D416ER-G dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of XC6121D416ER-G in technical solutions:

Q1: What is XC6121D416ER-G? A1: XC6121D416ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

Q2: What is the operating voltage range of XC6121D416ER-G? A2: The operating voltage range of XC6121D416ER-G is from 0.8V to 6.0V.

Q3: What is the output type of XC6121D416ER-G? A3: XC6121D416ER-G has an open-drain output type.

Q4: What is the typical quiescent current consumption of XC6121D416ER-G? A4: The typical quiescent current consumption of XC6121D416ER-G is 1.0µA.

Q5: What is the purpose of using XC6121D416ER-G in a technical solution? A5: XC6121D416ER-G is used to monitor the voltage level of a power supply and provide a signal when it falls below or exceeds a certain threshold, enabling safe shutdown or triggering specific actions in the system.

Q6: Can XC6121D416ER-G be used in battery-powered applications? A6: Yes, XC6121D416ER-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.

Q7: What is the accuracy of the voltage detection threshold in XC6121D416ER-G? A7: The accuracy of the voltage detection threshold in XC6121D416ER-G is ±1.5%.

Q8: Can XC6121D416ER-G be used in automotive applications? A8: Yes, XC6121D416ER-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

Q9: Does XC6121D416ER-G have built-in hysteresis? A9: Yes, XC6121D416ER-G has built-in hysteresis to prevent output oscillation near the detection threshold.

Q10: What is the package type of XC6121D416ER-G? A10: XC6121D416ER-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

Please note that these answers are general and may vary depending on the specific application requirements and datasheet of XC6121D416ER-G.